Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660X & XT660R > XT660X/R Tech Section > XT660X/R Exhausts
FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

Reply
 
Thread Tools Display Modes
  # 1  
Old 28-01-09, 03:55
Marc�o660 Marc�o660 is offline
Newbie XT-Moto
 
Join Date: Oct 2006
Location: Jundia�
Posts: 2
Marc�o660 is on a distinguished road
Fiiting a LeoVince exhaust...

Guys,

Is there any real bennefits (besides the sound and the beauty) in installing a X3 LeoVince pipe in a '06 XT660R ? I'm asking because they are really expensive down here in Brazil (around US$ 1.200, a set) and I would like to evaluate if it�s worth the investment.
I've already ordered a K&N filter, a Power Command III and will remove the snorkel. My goal is to gain some additional HP and torque and install also a 16 front sprocket, to have a more "confortable" bike in the highways.

Thanks a lot in advance !

Marc�o

(sorry for the bad english)
Sponsored Links
  # 2  
Old 28-01-09, 04:20
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,063
Kev is on a distinguished road
If it's HP you are after you need to order a stage 2 DNA Filter as well, these motors need to breath & are restricted by the intake system.

(Quote) DNA stage 2 filter only, standard main filter = 3.1HP. (Best gain in HP & torque for your money.)

http://www.xt660.com/showthread.php?t=4509

Most of the pipes offer around a 2 HP gain, with a big weight saving. So don't just look at the HP gain but also the weight reduction, the HP/weight ratio is better with a after market pipe.
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

  # 3  
Old 28-01-09, 04:44
Marc�o660 Marc�o660 is offline
Newbie XT-Moto
 
Join Date: Oct 2006
Location: Jundia�
Posts: 2
Marc�o660 is on a distinguished road
Thanks for the very quick answer Kev.
Do you think that even with the baffle in (FIM option) this pipe will perform better than the stock one ? (considering only the K&N filter and the snorkel removal )

Thanks again !

Marc�o
  # 4  
Old 28-01-09, 07:22
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,063
Kev is on a distinguished road
Quote:
Originally Posted by Marc�o660 View Post
Thanks for the very quick answer Kev.
Do you think that even with the baffle in (FIM option) this pipe will perform better than the stock one ? (considering only the K&N filter and the snorkel removal )

Thanks again !

Marc�o
Yes I do think it will perform better than a standard system.
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

  # 5  
Old 04-02-09, 11:18
wide wide is offline
Expert XT-Moto
 
Join Date: Jan 2009
Location: Cardiff
Posts: 180
wide is on a distinguished road
Seen these on e bay but seems too cheap. Anybody had any dealings??
http://cgi.ebay.co.uk/Exhaust-Leovin...1%7C240%3A1318
  # 6  
Old 07-02-09, 17:38
moffman moffman is offline
SemiPro XT-Moto
 
Join Date: Jan 2009
Location: Whitley Bay
Posts: 32
moffman is on a distinguished road
Will let you know when mine arrive as I have just bought a set (3/2/09) also bought a PC3, DNA stage 2 and K&N Stage 1, now just have snorkel to remove and goodies to fit.
I have a 2006 model XTX on an 07 plate, thoughtI was buying an 07 bike and didn't bother to check
Maybe then have to book some dyno time, but will start with some maps from here first.
  # 7  
Old 08-02-09, 22:35
wide wide is offline
Expert XT-Moto
 
Join Date: Jan 2009
Location: Cardiff
Posts: 180
wide is on a distinguished road
Seems really cheap at �299
  # 8  
Old 09-02-09, 17:09
moffman moffman is offline
SemiPro XT-Moto
 
Join Date: Jan 2009
Location: Whitley Bay
Posts: 32
moffman is on a distinguished road
Does seem cheap but have they have plenty of positive feedback and sell loads of cans and full systems on a daily basis. Check their feedback out.
  # 9  
Old 10-02-09, 16:05
moffman moffman is offline
SemiPro XT-Moto
 
Join Date: Jan 2009
Location: Whitley Bay
Posts: 32
moffman is on a distinguished road
Now have update, my cans arrived today so not bad delivery, I ordered on 3/2/09 at 20:30 and they got here today from Italy so only took 6 days. They are LeoVince X3 road legal cans with removable baffles and carbon fibre hangers. They look really smart and came with fitting instructions and all securely boxed in original packaging. Got to say at �299 including postage they are a bargain. Now just got to wait for my PC3 to arrive and the snow to melt then I can start bolting my bits on. Only rode the bike fo a couple of miles when I bought it but have now bought her Cans, PC3, K&N, DNA stage 2 and a stage 2 filter cover (courtesy of worry bro) Maybe I should have spent more time riding lol but she was a bit quiet when I took her out. These should make her sound a bit better and release a few more horses as well as shedding a few Kilo's.
  # 10  
Old 10-02-09, 17:49
wide wide is offline
Expert XT-Moto
 
Join Date: Jan 2009
Location: Cardiff
Posts: 180
wide is on a distinguished road
Whats a PC3?? Sorry new to this bike and its mods
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 00:50.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top