Hi. I cannot see any photos, can you tell me where the idle adjustment screw is please ? Cheers - Steve

__________________
___________________________
http://stevechol.livejournal.com

Idle screw.

Attached Images

DSCF2448.JPG (115.7 KB, 1114 views)

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Cheers :-)

__________________
___________________________
http://stevechol.livejournal.com

I tried this but all i get displayed is the word co,I held down the select and preset buton then switched the ignition on untill the word diag comes on the screen,I then pressed select untill co appears then switch the cut off button to on and start the engin and all that is displayed is the word co.
Am i doing something wrong or is it different on the 07 model.
Thanks,Andy

Hi all, I follow all the instructions and get the rev counter on screen but when I start the engine it stays at 0. I have tried this with the engine warm and cold but I can not get it to read.2004 XTX.help
Cheers
Croxalla

I have followed all the instuctions to display the revs on my 2004 XT660X and the display stays at zero. I did notice the CO1 CO2 displays on my bike display C1 and C2, maybe the computer system is slightly different ?

Has anyone managed to do this on a 2004 model of this bike ??

Thanks.

__________________
Stage 1 K&N, Stage 2 DNA, Kev fuel mod, Arrow Exhausts. Custom sticker job.

One other thing to note (as you will see when you do this) - is that all you get on the screen is the rev counter, the rest of the screen remains blank.

I was hoping to see what rpm i was doing at what speed, and although i had to guess the speed, this has still given me a better insight to the engine to what i had before.

Carry on

Xt1200z


Sent from my iPhone using Tapatalk

I think youre talking about a 660 not a 1200 z? Sorry dint read back 3 pages lol but the person asking about co2 rather then co1 . Co2 does nothing as that is for second cylinderd cylinder which the 600s dont have

__________________
Yamaha xt660x 2009 blue/gold mods= iridium plug, stage1+2, removed snorkel, blocked ais, akrapovric pipes, power commander pc3usb (pre made map), adjusted tps, dynojet 02 optimiser 30amp aux relay, smoked puig screen, oxford heated grips and brembo carbon ceramic pads, rfx 30mm bar raisers, puig long adjustable leavers, plus much more and a cheep �30 alarm which stopped it been stolen

Rising the old thread.
Today I tried to check idle speed, but bike refused to listen me. When I try to wake up the rev counter on the screen, engine will just start with the normal screen. The last time when I checked the idle speed, bike behaved same, but after several attempts it accepted the commands. XTR 2007.
Anyone with similar experience who can give me advice about solving this issue?
Petre