|
#
1
|
|||
|
|||
Cracking Akropovics
I have the SP Series pipes on my XTX which are cracking on the flange where the canister joins the pipe from the engine. Anybody else having this problem. I emailed Akropolvic, no reply yet. I sugest to all who have these pipes to take a good look, the only reason I picked this up is I had them off and was cleaning them. They are very fine cracks.
Last edited by garyb; 16-05-08 at 08:37. |
#
2
|
||||
|
||||
No I have not seen this before.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 |
#
3
|
||||
|
||||
Why not pop over to the newbies section and introduce yourself while you are here mate
__________________
or olives??? quote motonacio "this is to certify Meach is not the prat you'd think from his posts" http://www.youtube.com/imeach |
#
4
|
|||
|
|||
garyb,
I have had my akra's fitted now for 15+months and no issues whatsoever. Sorry to hear that matey. Keep pushing akrapovic for an answer Cheers WB |
#
5
|
||||
|
||||
Yes I agree it must be a freak occurrance, none of the people I know with Akrapovic exhausts on the XT's never had such issues. If the are still covered by warranty they should be replaced or repaired by those you've bought them from. Unless they were 2nd hand in which case your only option is to find a specialized TIG welder.
|
#
6
|
||||
|
||||
I have seen this before. The very same thing happened to a another spanish forum member. He did not manage to get Akrapovic to repair it.
__________________
|
#
7
|
|||
|
|||
Just got word from akropovic they say I must contact the distributor. What will they know, they only sell the pipes.
|
Sponsored Links |
#
8
|
|||
|
|||
i have also got his problem, i have just bought a set second hand and noticed a hairline crack, it is the same place i think, where the can joins the link pipe, the crack is on the can just where you attach a spring. I am not a happy chappy!! . have you had any luck from akrapovic?
|
#
9
|
||||
|
||||
Quote:
Sorry to hear that Not impressed by Akrapovic |
#
10
|
|||
|
|||
no problem with mine!!!
|
Thread Tools | |
Display Modes | |
|
|