Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660 Tech Section > Performance Modifications & Enhancements > Brakes, Wheels and Final Drive
FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

Reply
 
Thread Tools Display Modes
  # 1  
Old 07-04-08, 17:27
NickW909 NickW909 is offline
XT-Moto SuperStar
 
Join Date: Jan 2008
Location: West Midlands
Posts: 272
NickW909 is on a distinguished road
Wheel Balancing

The OE Pirelli Dragons I have just taken off didn't have any form of balancing on the wheel.

I've seen balance weights attached to the spokes on other bikes, however I just had my Dunlop Roadsmarts fitted and the shop didn't have that sort of weight, so the choice was no balancing or.....




No very happy with the look, but with 46g on the back and 60g on the front I think that would have made quite a difference to the feel.

What are your thoughts please?


Nick.
  # 2  
Old 07-04-08, 17:51
CaptMoto's Avatar
CaptMoto CaptMoto is offline
The Guv'nor
 
Join Date: May 2006
Location: London
Posts: 4,007
CaptMoto is on a distinguished road
if you loose as many as 2 on the front, you are likely to get a noticable wobble, I would spend the extra wad and go to another wheel specialist to have spoke weights fitted. If you do wheelies then its twice as likely you will loose them.
  # 3  
Old 07-04-08, 18:02
maxwell123455 maxwell123455 is offline
XT-Moto SuperStar
 
Join Date: Jul 2007
Location: Edinburgh, Scotland
Posts: 1,943
maxwell123455 is on a distinguished road
I had the same done when i got my off roading tyres put on. Even though im pretty sure i saw a box full of the wieght that you attach to the spokes.

Dont mean to nick a thread but how often should you get the spokes checked?? Every service or wheel change?? (which evers first)
__________________
Plough on
Sponsored Links
  # 4  
Old 07-04-08, 18:17
Tony660x's Avatar
Tony660x Tony660x is offline
XT-Moto SuperStar
 
Join Date: Oct 2006
Location: Staffordshire, UK
Posts: 569
Tony660x is on a distinguished road
Quote:
Originally Posted by NickW909 View Post
The OE Pirelli Dragons I have just taken off didn't have any form of balancing on the wheel.

I've seen balance weights attached to the spokes on other bikes, however I just had my Dunlop Roadsmarts fitted and the shop didn't have that sort of weight, so the choice was no balancing or.....




No very happy with the look, but with 46g on the back and 60g on the front I think that would have made quite a difference to the feel.

What are your thoughts please?


Nick.
Distressing I know, I fitted Distanzias and the muppets could not find the kit to balance the wheels at the time so I had no option to ride unbalanced and you know what it made no difference at all. The bike handled fine without the weights. I am not saying you do not need the weights.

I think you will have to live with them unless you can find a place to do the spoke weights just like the OEM ones if anyone does do these.

I just had a look at mine and I have no spoke weights or anything on the front but I do have a spoke weight on the rear which is almost exactly opposite the valve. I wonder if that has something to do with it... As you know I am on the first set of standard tyres just like you were.

Other than the fitting issue are you happy with the tyres or is it to early to assess them?
  # 5  
Old 07-04-08, 23:58
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,063
Kev is on a distinguished road
If I was the mechanic I would have let the tyre down again & turned it 180 degrees to use less weights.
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

  # 6  
Old 08-04-08, 01:04
NickW909 NickW909 is offline
XT-Moto SuperStar
 
Join Date: Jan 2008
Location: West Midlands
Posts: 272
NickW909 is on a distinguished road
Quote:
Originally Posted by Kev View Post
If I was the mechanic I would have let the tyre down again & turned it 180 degrees to use less weights.

Well that never crossed my mind, thanks Kev.

As Tony mentioned, the weights are opposite the valve, I was thinking of getting some spoke weights and removing the stick on ones, however I'll probably wait and see if they fall off first.

Either that or just take it into a decent bike shop and get it done!


Nick.
  # 7  
Old 08-04-08, 16:31
johnno johnno is offline
XT-Moto SuperStar
 
Join Date: Mar 2007
Location: loughborough
Posts: 278
johnno is on a distinguished road
Nick ive had this happen to me in the pass ,keep an eye on them i found some cleanin products will un stick them cheers johnno
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 23:20.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top