AIS Removal/ Disable:
To disable the AIS all you need to do is disconnect the blue plug that comes out of the top of the pump which is located behind the horn.


Unfortunately the only way to do this is to remove the seat, side panels, tank panels and then unbolt the tank. Instructions for removing the panels can be found in your Yamaha owner�s manual.
Do not disconnect the fuel lines to the tank, you should be able to slide the tank far enough back to give you access to the pump.



Disconnect the blue connector, i used some electrical tape and taped over the exposed connector on the pump. Then I used some Vaseline and covered the end of the connector



DISCLAIMER: YOU DO THIS AT YOUR OWN RISK AND MAY VOID THE MANUFACTURERS WARRANTY.