|
|
|
|
|
|
|||||||
| Dealers, Purchasing, Insurance, & Warranty Warranty claims what is covered and what is not? Also Insurance Vs Mods discussions. |
 |
|
|
Thread Tools | Display Modes |
|
#
1
 14-06-07, 19:52
|
|||
|
|||
|
Yamaha warranty
Just wondered if you could just clear this up for me. I have a Yamaha warranty on the bike till the end of 2008. But was wondering if I put aftermarket cans on the bike, stage 1 and 2 filters and a power commander. Would this invalid my warranty on the bike? If the bike went for a service or something went wrong with the bike, would I just take it all off so the bike looked standard.
Gavin |
|
#
2
14-06-07, 19:58
|
||||
|
||||
|
No mate, cans, filters and whatever do not invalidate the warranty unless what you are fitting interferes with the chassis, its safety and that of the rider. Yamaha offers a set of Akrapovic as an expensive add-on just so you know as you can see in the gallery pic on that yellow XTX.
Cheers |
|
#
3
14-06-07, 21:05
|
|||
|
|||
|
Does that apply to rear light mods too?
|
|
#
4
15-06-07, 04:55
|
||||
|
||||
|
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 
|
|
#
5
16-06-07, 05:12
|
||||
|
||||
|
From the Yamaha web page.
Warranty 
1. Will my warranty be affected if the periodic service is done by a non - Yamaha dealer?
No. Warranty covers the unit for manufactured defects. The quality or lack of periodic service has no influence on whether a failure is a manufactured defect or not. Warranty doesn't cover failures caused by faulty workmanship by others. We recommend you use a Yamaha dealer. They are factory trained, have the necessary special tools and up to date information.
2.
Will the fitting of additional accessories (genuine or non genuine) to my motorcycle, affect the warranty?
No! However, any modification from standard may affect the performance and/or durability of the unit. Failures caused as a result of the accessory are not a manufactured defect and as such not covered by warranty.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946
|
| Sponsored Links |
|
| Thread Tools | |
| Display Modes | |
|
|
|
|
Linear Mode
