|
|
|
|
|
|
|||||||
| General Help Section Members help each other here with tips and tricks about mods / maintenance and servicing based on their own experiences |
 |
|
|
Thread Tools | Display Modes |
|
#
1
 15-10-18, 15:31
|
|||
|
|||
|
Indicators not working
I installed LED indicators a while back. Worked fine but one snapped so I bought a pair and replaced both rear indicators.
These worked fine for about a day then all four stopped working. The fuse is fine and I have replaced the flasher unit for a LED one but they still don't work. Any ideas? |
|
#
2
15-10-18, 16:42
|
|||
|
|||
|
TBH I thought that the lights had to be the same,all round on led's..at the least thats what I have always done and never had any issues.
|
|
#
3
15-10-18, 16:48
|
|||
|
|||
|
They are the same voltage if that helps
|
|
#
4
15-10-18, 17:40
|
|||
|
|||
|
Is your new led flasher relay an adjustable one with the small screw hole for a plain screwdriver.
__________________
2011 xt660z. Yoshimura cans ,kev mod,Dna 2, Stahlkoffer panniers,Hepco Becker box,Givi crash bars,Mita e07 tyres. |
|
#
5
16-10-18, 14:56
|
|||
|
|||
|
No, sealed unit
|
|
#
6
16-10-18, 18:57
|
|||
|
|||
|
Check the relay wires to see if it getting power.
__________________
2011 xt660z. Yoshimura cans ,kev mod,Dna 2, Stahlkoffer panniers,Hepco Becker box,Givi crash bars,Mita e07 tyres. |
|
#
7
25-10-18, 09:39
|
|||
|
|||
|
Found the cause of the problem, there is another fuse hidden away between the battery and frame in a little single connector, that was blown.
Replaced all working again. |
| Sponsored Links |
|
| Thread Tools | |
| Display Modes | |
|
|
|
|
Linear Mode
