Hi!

A few weeks ago I purchased a mighty fine XT660Z (ABS) 2014 with only 4700Km on it. (1 elderly owner)

LINK TO PIC

The bike had a CTEK connect port installed so I had to purchase a charger to fit.

I have added heated grips and bar protectors.

I have also ordered a dual USB port, shorter 2-finger break/clutch levers and a pair of LED extralights and an X-grip for the phone.
Bar raisers are also installed for a bit comfier ride and I got a pair of 2nd hand SW-motech EVO pedals that has a nice large platform to stand on, but they do come out further from the frame making my feet stance wider.

Now to the electronics...

I want all extras to be off when i turn off key so I will install a relay for the heated grips and most likely an extra relay for the LED-lights as well.


The power for the heated grips and LED-lights will come from the screw terminal on the front left side of the tank.

The controller feed for the heated grips relay will be from the extra connector in the dash.

USB will be powered from the extra connector in dash.

The LED-lights will use the main beam as controller so they turn on/off simultaneously as main beam only



Question - is main beam relay powerful enough for a 55W H7 and 2pcs LED-lights? they are stated 125W so ~10-11W

Or can I replace this relay with something more powerful?