Hi guys,

I had my clutch plates out for inspection and when installing everything back I didn't recall the orientation of the 'clutch damper spring'. This is the concave metal disc (says OUTSIDE on the concave side) that goes in second after the first metal disc 'clutch damper spring seat'. The service manual says to install with the OUTSIDE mark facing out - so I installed it with the outside mark facing to the outside of the engine as in to the right side when looking at the motorcycle from behind. Is that correct or would the OUTSIDE mark need to be facing out from the clutch plates so towards to cylinder?

I actually tried both but I'm having another problem with the clutch as it is not actuating (no resistance in clutch lever), not sure where the problem is but I will take my time tomorrow so I'd also like to be sure then the clutch damper spring is facing the right way so I won't have to pull it off once more .

Thanks in advance for anyone willing to supply me the answer!