|
|
XT660Z T�n�r� General Discussions Everything and anything of general topic in relation to the new T�n�r� is discussed here |
|
Thread Tools | Display Modes |
|
#
1
|
|||
|
|||
Difference in Tenere models from 08 onwards
Hi,
Thanks for this immense resource of a forum first of all, learned so much! Can someone point out the differences that each new XTZ model from 2008 onwards had? Cost, Miles & Condition are great one factor, but should I for example "absolutely avoid 08 model because it had X,Y & Z and go for 12 model because X & Y where solved" or vice versa? Anything to consider/avoid when buying the Tenere? 85% of the use will be riding on the worst roads of Europe (Malta - potholes, gravel, bumps... ) and the rest leisure off-road. Thanks! |
#
2
|
|||
|
|||
Hello and
to XT660.com
There is really not a lot of difference between models. Basically just try and get the best one you can for what you can afford. Anyway, see if this helps... 2008 Available in khaki, black and white Problems with some regulator/rectifier connectors failing with burnt out earth pins. Neither the reg/rec itself, or the connector part numbers have been superseded. It appears the fault was due to the connector being snapped home properly on assembly and resulted in poor contact/high resistance and water ingress. Affected bikes had the loom replaced under warranty. Many 2008 bikes are still running (like mine) without issue. Any bike on the road now (eight years on) will have either been fixed, or is one that isn’t going to be a problem. Problems with excessive amounts of oil blowing out the crankcase breather on long high speed runs/motorway use and filling the drain hose quickly which can result in oil backing up into the air box. A different design of baffle chamber was fitted from 2009 and is a retro-fit part. It is not a big issue and just means that you need to check/empty the drain hose more often. Many 2008 bikes will still have the old design (smooth sided) chamber fitted (mine has) without issue. 2009 Available in black (decals changed), red or blue Different seat fitted with grey lower panels and either red or yellow stitching. A small minority of 2009 bikes have suffered from failed gear selector mechanism parts in the some cases cause transmission lock up and broken dogs on 3rd/4th gear. In the worst cases the debris from the broken parts has damaged the crankcase internally and/or the crankshaft, and in a few the crankcase itself has burst open. This issue so far has only affected a small number of bikes. I am currently exchanging communications with Yamaha about this problem… 2010 Available in black, blue and red. Production moved to Spain 2011 Available in black, blue and white. ABS model available with lower suspension/ride height (no fork preload adjustment) and the battery moved to under the tank to make way for the ABS pump under the seat. 2012 Available in black, blue and white (changed decals). Production moved to France. ABS model discontinued in the UK (available elsewhere in Europe), replaced by a UK only “Touring” model with the same low suspension and luggage as standard, but without the ABS. Midway through 2012 different fork internals were fitted made by KYB which include progressive springs. Externally these bikes have a raised nut type adjuster (previously a recessed Allen head). 2013 Available in matt grey or blue (changed decals). UK only “Touring” model discontinued. Headlight reflector design changed slightly. Grey plastic “crash” panels were replaced by black (depending on main colour). 2014 Available in matt grey or blue. No changes. 2015 Available in matt grey (changed decals) and white (changed decals and they now call it “Race Blu”!?) No changes. 2016 No new model (still a 2015 model)
__________________
Click here to access the full list of XT Mods
Click here to join the XT Supporter's Scheme | Click here to find out the benefits of becoming a Supporter Last edited by Pleiades; 10-01-16 at 16:23. Reason: amend colours |
#
3
|
|||
|
|||
What year did they change the fork pre-load adjusters??
Am I remembering correctly that the place of production is evident on the compliance plate? |
#
4
|
|||
|
|||
Mid 2012.
Should do. I know the Italian ones say "Yamaha Italia S.p.A (as I have one) and the French ones say "MBK Industrie", not sure what the Spanish ones say? |
#
5
|
|||
|
|||
So got off my backside to look and my White 11/11 was made in Yamaha Motor ESPANA S.A
Edit, did you add the front fork changes in 2012 or did I miss it and ask a totally redundant question?? |
#
6
|
|||
|
|||
That's useful to know. As is white was a 2011 colour - I'd forgotten that. Ta.
No, it was already there in the first post! |
#
7
|
|||
|
|||
Pleiades - Thank you! Exactly what I was looking for. Not much difference after all. Thanks
|
#
8
|
|||
|
|||
No, hardly any differences, most important is the difference in height(seat and suspension) between the non-ABS models and the ABS models. Take note that the '08 models had a different breather, which caused some minor problems but mostly replaced by an modified '09 breather(mine under warranty!). Otherwise a very reliable motorcycle and engine, with tons of ridin' fun!
__________________
XT rules! Make the world beautiful, get a tattoo. Nick Curran R.I.P. '77-'12 XT660Z Tenere '08 http://dallastx.smugmug.com visit: www.hank3.com SRV: http://www.youtube.com/watch?v=NU0MF8pwktg |
Tags |
tenere models years |
Thread Tools | |
Display Modes | |
|
|