Have had the LED light Bar sitting in the shed for a while now, while I cogitated on the best method to mount it to the "Ten".

Lots of angles to work with, and minimum clearances etc, so not a straight forward exercise.

To gain the maximum support strength, it was necessary to mount it to the frame, as the instrument bracket is only made of small diameter tube, and already has form for failing on bikes supporting large GPS's etc



The bracket was made from 3.5mm aluminium plate using SS fittings. Quite happy with the outcome as it is really very solid.





Next step will be to wire it in....I'm saving that for next time I have the tank off..

__________________
Attitude is the difference between an Ordeal and an ADVENTURE