Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660Z T�n�r� > XT660Z T�n�r� Tech Section > XT660Z Luggage, Racks & Panniers
FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

XT660Z Luggage, Racks & Panniers Discussion re luggage for he new Tenere

Reply
 
Thread Tools Display Modes
  # 1  
Old 23-03-15, 22:17
dommiek dommiek is offline
Expert XT-Moto
 
Join Date: Jan 2009
Location: Lincolnshire UK
Posts: 129
dommiek is on a distinguished road
660Z Which rear rack?

I'm considering buying either the Touratech or the SW Motech rack. They both look similar apart from the colour but I'd like to fit the lightest one.
Having the SW Motech one on my Versys 650 I know it's quite heavy (and well made), has anyone tried both or either?
  # 2  
Old 23-03-15, 22:37
l8ktm l8ktm is offline
SemiPro XT-Moto
 
Join Date: Aug 2011
Location: Forest of dean
Posts: 36
l8ktm is on a distinguished road
Sorry, not tried either of those but bought this one for my Tenere and very happy with it - http://www.zenoverland.com/luggage-p...age-plate.html
  # 3  
Old 24-03-15, 09:33
dommiek dommiek is offline
Expert XT-Moto
 
Join Date: Jan 2009
Location: Lincolnshire UK
Posts: 129
dommiek is on a distinguished road
looks like a very well made rack; I'll consider it but think it might be a bit too wide. I like the size of the Touratech smaller rack but I'm sure the quality is not as good as the Zen.
  # 4  
Old 24-03-15, 23:07
majland majland is offline
Expert XT-Moto
 
Join Date: Aug 2013
Location: Denmark
Posts: 223
majland is on a distinguished road
Have you seen http://www.altechdesigns.co.uk/11-luggage-racks He has 3 sizes.

I've just made my own by hand to fit an old hepco+becker topboks with a univeral tube rack.

H+B makes a special rack for it (€140) but it would but the box so far back that i would not be able to open the sidecases.

Yes i need to take it apart again and paint it (and they last 4 bolts has been put in with self-locking nuts below. 5mm alu is not much thread)
Attached Images
File Type: jpg 20150323_154444.jpg (136.8 KB, 50 views)
File Type: jpg 20150324_080416.jpg (193.3 KB, 44 views)
File Type: jpg 20150322_201437.jpg (143.1 KB, 40 views)
File Type: jpg 20150322_201318.jpg (136.7 KB, 42 views)
__________________
2011 Yamaha XT660Z ABS T�n�r�.
  • Puig +8cm dark screen, Garmin Zumo 220, Scottoiler eSystem v2
  • Barkbusters Storm with external weights, Noname 30mm bar risers & EzMoto alu. levers
  • Kev's O2 Controller, Mccoi stepless controller with Hein Gericke heated grips
  • TT +4cm seat, Pivot Pegs, Altech stainless sprocket cover

Last edited by majland; 25-03-15 at 18:03.
Sponsored Links
  # 5  
Old 25-03-15, 08:15
mb4807 mb4807 is offline
Expert XT-Moto
 
Join Date: Oct 2013
Location: France
Posts: 124
mb4807 is on a distinguished road
TT

I have the small Touratech one. It's perfectly well made and looks very smart. Unless you plan to carry a huge roll bag I can't see any issues with it. They do do a larger one too. If you want big luggage carrying capacity, it's not the one for you, but if you want something that looks nice when not in use, then in my opinion, this is the one to have.
  # 6  
Old 25-03-15, 10:17
dommiek dommiek is offline
Expert XT-Moto
 
Join Date: Jan 2009
Location: Lincolnshire UK
Posts: 129
dommiek is on a distinguished road
thanks for the replies guys; MB4807 I think the small TT is just too small, looks neat though. I like the altech design ones, not heard of them before, thanks for that Majland. How are you getting on with your Pivotpegz?
  # 7  
Old 25-03-15, 14:12
aliwakeskate aliwakeskate is offline
Expert XT-Moto
 
Join Date: Jan 2012
Location: Birmingham
Posts: 159
aliwakeskate is on a distinguished road
Hi all,

It's me that makes the Altech Designs luggage plates. I made some last year for a few people along with a few other bits and set up the website to make it easier for folks to buy them.

Weight wise, the smallest one is just 1kg, the medium 1.3kg and largest one is about 1.6kg. I've got the medium and large in stock but run out of small ones. Although I have a small one with minor powder coating blemish on the side that I'll sell cheap.

Gabe at zenoverland makes some great products also. I made the racks with the tenere looks in mind so the racks follow the lines of the bike nicely. The medium and large can both accomodate 40l roll bags. I use the small one for a small bag for my daily use to work.

If you are interested, give me a shout or you can buy direct from the website.

Al.
__________________
XT660Z

AltecH Wheels
Wheel building and refurbishment, UK wide
AltecH Designs
XT660 Radiator guards, sprocket guards, luggage racks, DNA air filter covers
  # 8  
Old 25-03-15, 15:49
Desert Racer Desert Racer is offline
XT-Moto SuperStar
 
Join Date: Oct 2014
Location: Gladstone, QLD, Australia
Posts: 1,034
Desert Racer is on a distinguished road
Quote:
It's me that makes the Altech Designs luggage plates. I made some last year for a few people along with a few other bits and set up the website to make it easier for folks to buy them.
I have a Black 'Tenere' rad guard & sprocket guard on the project wish list at the moment. When funds allow I'll be putting the order in.
  # 9  
Old 25-03-15, 17:52
majland majland is offline
Expert XT-Moto
 
Join Date: Aug 2013
Location: Denmark
Posts: 223
majland is on a distinguished road
Quote:
Originally Posted by dommiek View Post
How are you getting on with your Pivotpegz?
Really love them :-)

Bought them in 2010 for my Super Tenere and just moved them to the pony when i got that in 2013.

Did around 22000km with then on the old mule and are up to 15000km now on the new. They are (as many other add ons) ridiculous expensive, but once you have forgotten what you paid they are marvelous for us with big feet.

I knew about Al (Altech) because i've bought a sprocket cover from him and have been considering a red dakar radiator guard. I also considered to buy and adapt a rack but ended up DIY enstead to make sure that i would'nt need to bolt the h+b rack adapteor to a hole in finished rack.

The CNC cut looks much nicer than what I can do with a grinder. Maybe I'll add some round holes that can just be drilled before painting both the alu plate and hepco+becker rack:-)

PS thats how my sprocket and chain looked after 200km on wet and salty roads at 2 degrees C last week. The scottoiler kept the center of the chain well oiled but the outer plates does not get much "love". That the reason my next chain will be the DID VX2 with gold outer plates. They do not rust easily...
Attached Images
File Type: jpg tenere_sprocket_cover.jpg (109.0 KB, 24 views)
__________________
2011 Yamaha XT660Z ABS T�n�r�.
  • Puig +8cm dark screen, Garmin Zumo 220, Scottoiler eSystem v2
  • Barkbusters Storm with external weights, Noname 30mm bar risers & EzMoto alu. levers
  • Kev's O2 Controller, Mccoi stepless controller with Hein Gericke heated grips
  • TT +4cm seat, Pivot Pegs, Altech stainless sprocket cover

Last edited by majland; 26-03-15 at 15:14.
  # 10  
Old 26-03-15, 02:12
moggy moggy is offline
Newbie XT-Moto
 
Join Date: May 2011
Location: London
Posts: 8
moggy is on a distinguished road
I fitted the Givi racks to mine. Got a set of Aluminium panniers hand made from 3mm aluminium welder plate and German quick release locks.



You can just see Givi racks



Pannier MK1



Will take pictures and find make of German pannier securing locks.

If interested I can get Panniers welded and powder coated. I had black and silver but I thing I can get any colour!
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 01:34.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top