I have a xtx thats "stuttering" badly on acceleration when its hot.
Its been sitting for a few months, I just added a 3/4 tank of fresh 98 octane fuel (highest available here).
I'll ride up the road and it will be fine for about 2 kms or so but then when i twist the throttle it starts cutting out momentarily. it revs fine when standing with no breaking down ay all.

Ive tried changing the plug,
even changed the coil,
and cleaned the air filter.

I checked the fault codes and in part 2 (61) error code memory log reads "30"
(62) number of error codes in memory reads "2"

what do you guys think? a bad connector plug somewhere or a bad ground wire?
how about a blocked fuel filter sock in the tank?
or a dirty injector?

I think the bikes a 2004 and it has a power commander fitted, with only 28,000kms on it...

any help would be most appreciated! Im stuck here!

ill check the connectors under the seat and tank today, drain and check the fuel and see how i go. any other advice?

You may check the wiring of the temperature sensor towards the ECU.
(ohm meter)

salu2!

__________________
Saludos,
Joe
http://web538.ypsilon.ibone.ch/index...d=89&Itemid=42

neoprene fork protectors Acerbis / blue Puig wind shield / fork spacers 24mm / snorkel and resonater out / Acerbis hand protectors / 25 mm bar risers / 12 V outlet / "soft throttel mod" / engine protector home made / PC III USB / DNA ST2 / K&N ST 1 / BSM "Future extreme" exhaust / Wilbers "Adjustline" Shock / XTX links / luggage carrier home made / automatic chain oiler home made

Its the plug change it to for a good quality iridium one, it's happened a couple of times on here

__________________

Sell My XTX I Rather Shove
Wasps Up My Arse...