Difficult to start 0 rpm
I swapped my fuel map last night and now the bike won't fire without a bit of throttle, so i thought maybe the rpm is a little low, went into the DIAG and low behold the rpm continues to read 0 with the engine running?
Bike was fine before i map swap, but i can't comment on the rpm side of the problem as i've not looked at thr rpm for a while.
i've put in a K&N and removed the snorkel, ran origanally on the 501 map and ran very well, but i saw the 511 map stated the removal of the snorkel and a high flow filter.
as for the rpm, i'm going to check the connectors next to the ecu once i get home but is there anywhere else to check?
|