|  |  |  | 
|  | 
| 
 | |||||||
| XT660Z T�n�r� Tech Section Tyres, Mods, Luggage & Long distance preparation | 
|  | 
|  | Thread Tools | Display Modes | 
| 
               #
            1   
            | |||
| 
 | |||
|  
            Exhaust sound changing on cold start 
            
             Hi there I have noticed my exhaust note changes on and off to a deeper tone on cold start up. it's not changing revs just sounds like it's getting deeper then stops. Some times it does it a few times on and off for the first minute of start up. I have a O2 controller and a fuel mod fitted is this normal?
             Time spent without rod in hand is time forever wasted. 
             __________________
             Time spent without rod in hand is time forever wasted.   | 
| 
               #
            2   
            | |||
| 
 | |||
| 
             I have recently fitted a 02 Controller and fuel mod with Dna filters to my 2011 Tenere and i get the same noise as your describing,once the bike is warm it disappears.
             A strange think is that my old 2009 Tenere i recently sold i used the same controller,fuel mod and filters that are now fitted to my newer Tenere and that never made any noise. 
             __________________
                 2011 XT660Z 2008 TDM 900 Last edited by Gary117; 08-09-14 at 19:50. | 
| 
               #
            3   
            | |||
| 
 | |||
| 
             Yea that's it almost sounds like a choke is being activated on and off
             Time spent without rod in hand is time forever wasted. 
             __________________
             Time spent without rod in hand is time forever wasted.   | 
| 
               #
            4   
            | ||||
| 
 | ||||
| 
             Could be the AIS intake sound? The valve is wide open for cold starts to reduce the hydrocarbons for emission control. 
            
             __________________
             Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946   | 
| 
               #
            5   
            | |||
| 
 | |||
| 
             Cheers kev so if I block off the AIS as per the mod if it is the AIS will that stop it? 
             Time spent without rod in hand is time forever wasted. 
             __________________
             Time spent without rod in hand is time forever wasted.   | 
| 
               #
            6   
            | ||||
| 
 | ||||
| 
             Give it a go block your AIS pipe & let us know if it sorts the sound out. 
            
             __________________
             Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946   | 
| 
               #
            7   
            | |||
| 
 | |||
| 
             Yea might give it a crack 
             Time spent without rod in hand is time forever wasted. 
             __________________
             Time spent without rod in hand is time forever wasted.   | 
| 
               #
            8   
            | |||
| 
 | |||
| 
             Yep that's it turned the bike on and as soon as I pinched the AIS pipe it was sounding normal. It's more of an intake noise should I block the AIS I kind of like the popping on the over runs is it going to hurt the bike if I just leave it
             Time spent without rod in hand is time forever wasted. 
             __________________
             Time spent without rod in hand is time forever wasted.   | 
| 
               #
            9   
            | ||||
| 
 | ||||
| 
             Up to you. 
            
             __________________
             Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946   | 
| Sponsored Links | 
|  | 
| Thread Tools | |
| Display Modes | |
| 
 | 
 |