Hi to all,

After what looked like a long wait I got my MM pack. By the way thanks to the guys - great job.
Here is what i have got:
https://dl.dropboxusercontent.com/u/...2011.04.46.jpg
https://dl.dropboxusercontent.com/u/...2011.04.52.jpg

Now the fitting part, in fact it took me nearly four hours as there were few things i had to fine tune before everything was ready:
Before:
https://dl.dropboxusercontent.com/u/...2011.04.59.jpg
During the process:
https://dl.dropboxusercontent.com/u/...2011.30.51.jpg
Then i discovered this:
In the welding process of one of the heat shield nuts on the inner side of the short downpipe there were some steel "bulges" leftovers from the weld. I had to file them which was easier said then done as the steel is really hard and difficult to file. On the other hand the access is limited and the only thing i could think of was to do it by hand.
https://dl.dropboxusercontent.com/u/...2013.03.13.jpg
and after....
https://dl.dropboxusercontent.com/u/...2014.14.22.jpg

Heat shield on the airbox:
https://dl.dropboxusercontent.com/u/...2014.13.42.jpg
and the final result:
https://dl.dropboxusercontent.com/u/...2017.07.09.jpg

What to say I am very happy with the results:
The bike feels really well and lighter
The other thing is - it is louder than the stock pipe but still road legal, which is the best part....

I think that if it was an X 2 in 2 would look best but for R the 2 in 1 is a must. Yamaha should have done that from the very beginning...

and now:
https://dl.dropboxusercontent.com/u/...2017.07.09.jpg

__________________
that is how i feel about my XTR
Mods so far:
Hyperpro front springs; Hyperpro rear shock spring; modified air box; LED tail light; LED indicators + new relay; YZ pegs; Lucas aluminum bar; brisk spark plug; snorkel removed; DNA stage 1; second hand DynoJet O2 mod; crash bars; front and rear steel braided brake lines; soft EBC brake pads; mitas 07 tyres, 2in1 Metal Mule exhaust, Blocked AIS, tall OEM screen, OTR bash plate

It sure looks nice!