![]() |
![]() |
![]() |
|
|
Electrics & Lighting All discussions related to bike electric, lights, bulbs, fuses and wiring. |
![]() |
|
Thread Tools | Display Modes |
#
1
|
|||
|
|||
![]()
Went today and filled up my X and the fuel light is still flashin on and off ?
![]() Have been told it could be Sensor has bit the dust But hoping its not as bad ? HELP ? ![]() Last edited by terminated; 29-10-13 at 02:07. |
Sponsored Links |
#
2
|
|||
|
|||
The light should indicate an error code with its flashes...
4 flashes - 3 second gap = short circuit 8 flashes - 3 second gap = open circuit It is probably more likely to be abraded wiring or corroded connectors, rather than the sender unit itself. Start by getting the tank off and visually inspecting all the wiring and connectors associated with the circuit. Next step would be to check the resistance between the green/white and black wires at the connector block on the pump body with no fuel and increasing fuel in the tank. You should either have very high resistance (no continuity) or very low resistance (continuity) depending on fuel level. I'd guess high resistance when the tank is empty and low when full, but it could be the other way round depending on how the warning lamp is wired. |
#
3
|
|||
|
|||
Cheers bud for the advise think it mite also have to do with a slight water inlet on the speedo lol from the owner before me.
Its going in on monday for its 240000 miles service so they said they will have a look at it for me this advise will help narrow the search down ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|