|
|
|
|
|
|
|||||||
| XT660Z T�n�r� General Discussions Everything and anything of general topic in relation to the new T�n�r� is discussed here |
 |
|
|
Thread Tools | Display Modes |
|
#
1
 26-02-13, 17:09
|
|||
|
|||
|
Spares Request
Has anyone got a rear light/reg plate assembly they want to get rid of.
I snapped an indicator off in an off road "technical dismount" when I hit a massive rock, and the indicator broke the plastic of the light assembly away. I've tried Araldite but it flakes off with the mud and jet washes so I'm now holding it on with a good old cable tie. I'm not keen on the R&G tail tidy and prefer the original. Before I buy a new spare part I thought I'd see it there is anyone on here that might have upgraded to a tail tidy and have a spare rear end they'd like to get rid of??? I'm willing to pay or possibly swap a spare?? |
| Sponsored Links |
|
#
2
27-02-13, 04:58
|
|||
|
|||
|
I broke the parrot beck tail light on my XTR...
So I put a WR450 rear guard on.. Looks way better with a single pipe.. 
__________________
Harley Davidson.. The easyest way to turn gasoline into noise with out the side efect of horse power... |
|
#
3
27-02-13, 10:32
|
|||
|
|||
|
How badly did it break, this happened to me a few years ago. I just got a small piece of aluminium and shaped it the same as the area behind and pop riveted it behind to support the indicator. Used small rivets and painted them black & you can't even tell!
Quote:
__________________
What do I know about motorbikes? I fix London busses for a living.... :tenere: Mods so far.. Barkbusters, ARDcases on Holan racks, Garmin 550t & Ram adapter, Lowered metal mule links & forks dropped by 15mm, DNA filter, Pivot Pegs, Symtec heated grips, Yamaha engine bars, Breather box, Touratech rear rack & tail pack (large), Polisort freeflow mud guard (when i'm trail riding), ciggy adapter, waterproof rectifier wiring, more to come... |
|
#
4
13-03-13, 14:09
|
|||
|
|||
|
I have done the same and bought some after market indicators and located them as per the bellow pic. There was not much room inside for the bolts but l managed by removing a small amount of plastic with a big drill bit.
I bolted a piece of gal tin sheet across the tail just below the tail light and bent the ends forward. I relocated the number plate as it kept falling off due to being made of rubish tin and flipped the plate light upsidedown. Still need to remove all the other brackets and cut the tail off. Also scored another complete unbroken tails for $50, noice. 
|
|
#
5
13-03-13, 15:40
|
|||
|
|||
Complete rear assembly - but no indicator or rear lights!!
Hi JayB,
I've got a rear assembly/ tail light unit/ bracket licence for a xt660z excluding the indicator's and rear light!! The number plate light is still attached. I have bought a after market tail tidy. Let me knw if thats what you're after... Cheers mate!! JP
Quote:
|
|
| Thread Tools | |
| Display Modes | |
|
|
|
|
Linear Mode
