Hi all, any tips on holding the front up to take the front wheel off for changing tyres of doing fork seals? Ive put it on rear padock stand & tryed to lift the bash plate with a trolly jack & its trying to lift the rear, i want to raise the front forks but my garage beams dont look strong enough? Any idea's????????

When i did my xtx front seals i used a stack of bricks...not the best idea but if you want the wheels off the floor it works...oh and some thick mdf wood on top of bricks or some old carpet...better still rubber car floor mat

Alex

Sent from my GT-I9100T using Tapatalk 2

if your budget can stretch to it...
one of these is worth its weight in gold...

http://www.supercheapauto.co.nz/onli...d=284935#Cross

__________________
Harley Davidson..
The easyest way to turn gasoline into noise with out the side efect of horse power...

Thanx for the tips, think i will have to invest in a lift

I just use my trolley jack and axle stands under the foot peg brackets.

I have a trolly jack for previos bikes but hesetant to use it due to the underslung pipes.

Is it safe to hold the bikes weight on the pipes :s

Sent from my GT-N7100 using Tapatalk 2

__________________
2 wheels is freedom , 1 wheel is heaven
Theory Passed 3/04/08 das test passed 12/06/08
piaggio nrg 50cc-sold / yamaha xt125r -stolen / Yamaha XT660X

I would not use the pipes to jack it up, you could damage them.

Ahh sorry i see you have a bash plate so no stress would be put on to the exhaust.

Thanks.

Sent from my GT-N7100 using Tapatalk 2

__________________
2 wheels is freedom , 1 wheel is heaven
Theory Passed 3/04/08 das test passed 12/06/08
piaggio nrg 50cc-sold / yamaha xt125r -stolen / Yamaha XT660X