Does the pannier rail go over all after market exhausts?

Do you mean the Yamaha pannier rails or one of the many other options?

I have a single X Racing can and ARD pannier rails (Holan I think?) and there's tons of room.

I would imagine that aftermarket cans sit within the parameters of the Yamaha unit, certainly the Akra's/Leo Vinces seem to.

__________________

i have OE rails and tried a mtc single can. it cleared the rail but was too close to the pannier so i took it off again. it was too loud anyway.

__________________
check out www.redbikejohn.com for all the latest race reports from the CHEC and enduroland.

Hey enduro374, does your X-Racing can include a db killer at the end of it and if so, what's the diameter of it? See the thread I started just below.

Jami

redbikejohn what baffles did you have in the mtc, i have the same can but is now sounding v nice thanks to a few phone calls and a very helpfull
mtc people

Not sure. I got it second hand but very good condition. I'm not the only one that think they are too loud. There's another thread on here somewhere.
I'm not a big fan of the db killer type baffle as its a lazy way of killing sound - and subsequent power loss, instead of engineering in a mellow sound with modest power gains and light weight. But at 80 quid I gave it a go. Got my money back as I sold it within minutes.

__________________
check out www.redbikejohn.com for all the latest race reports from the CHEC and enduroland.

Jami - Yes although it has tried to escape a few times.

I'll measure it in the morning and post the result.

Cheers

__________________