|
|
|
|
|
|
|||||||
| XT660X & XT660R General Discussions General discussion related to XTX & XTR Only |
 |
|
|
Thread Tools | Display Modes |
|
#
1
 19-08-12, 10:27
|
|||
|
|||
|
XTR 525 Sprokets
Hi...
I have been trying to fnd somewhere that sells 525 sprockets for a XTR... OTR sells sprokets & chain kits... But I don't want to ship a chain half way around the world when I can buy them here... dose anyone sell just 525 sprockets ??
__________________
Harley Davidson.. The easyest way to turn gasoline into noise with out the side efect of horse power... |
|
#
2
20-08-12, 18:53
|
|||
|
|||
|
http://www.wemoto.com/bikes/yamaha/xt_660_r/04-09/ Any use? good company to deal with.
|
|
#
3
21-08-12, 01:47
|
|||
|
|||
|
Quote:
Theres are the standard size 520 sprockets... May have to end up ordering from OTR .. 
__________________
Harley Davidson.. The easyest way to turn gasoline into noise with out the side efect of horse power... |
|
#
4
21-08-12, 23:23
|
|||
|
|||
|
I was thinking the same.. Extra miles on delivery.
But when I see the ZVM-X chain for �130 after buying the whole 525 set for �145 inc postage, what the hell. 
__________________
PCV REPLACEMENT ECU WITH 04 WIRING LOOM STAGE1&2DNA GEL SEAT INSERT LOWERED 20mm FRONT+REAR CLUTCH ARM MOD FORKSPRING SPACERS TALLER SCREEN THROTTLE GRIP CAM MOD DISTANZIAS 46TOOTH REAR SPRKT SPEEDO HEALER 30MM HANDLEBAR RISERS TOPBOX MOUNT 08 XTX SORTED, ALMOST. ...SHEEPSKIN - Because a pain at the rear is not just a moany pillion. |
|
#
5
22-08-12, 16:05
|
|||
|
|||
|
Ordered Sunday, Delivered Wednesday... OTR.
Delivered to work. I'm not at work today, hmm, guess I'll have to wait 'till tomorrow.
__________________
PCV REPLACEMENT ECU WITH 04 WIRING LOOM STAGE1&2DNA GEL SEAT INSERT LOWERED 20mm FRONT+REAR CLUTCH ARM MOD FORKSPRING SPACERS TALLER SCREEN THROTTLE GRIP CAM MOD DISTANZIAS 46TOOTH REAR SPRKT SPEEDO HEALER 30MM HANDLEBAR RISERS TOPBOX MOUNT 08 XTX SORTED, ALMOST. ...SHEEPSKIN - Because a pain at the rear is not just a moany pillion. |
|
#
6
24-08-12, 12:32
|
|||
|
|||
|
OK, own up, who put the standard 520 sprockets in the box with the 525 chain?
Not amazingly impressed. Loosen front sprocket nut, split chain, drop rear wheel, remove rear sprocket, remove front sprocket (bytch), fit new sprockets, fit rear wheel, put new chain on.... Luckily I noticed the play in the chain/sprockets before I rivetted the new chain on!.. BOLX. Ok put it all back as it was, waste of a couple of hours 
Also lucky I had clip-link (temporary) on old chain so I could re-fit. Hmm, not like I can ride to the shop to get the correct parts. I don't know how much thicker the 525 sprockets should be? but I'm sure they shouldn't be the same thickness as the original 520 sprockets? Before I do it all again, I will drill a piece of metal for pulling front sprocket off.
__________________
PCV REPLACEMENT ECU WITH 04 WIRING LOOM STAGE1&2DNA GEL SEAT INSERT LOWERED 20mm FRONT+REAR CLUTCH ARM MOD FORKSPRING SPACERS TALLER SCREEN THROTTLE GRIP CAM MOD DISTANZIAS 46TOOTH REAR SPRKT SPEEDO HEALER 30MM HANDLEBAR RISERS TOPBOX MOUNT 08 XTX SORTED, ALMOST. ...SHEEPSKIN - Because a pain at the rear is not just a moany pillion. |
|
#
7
24-08-12, 12:38
|
|||
|
|||
|
Quote:
Knowing my luck that would happen to me... LOL..might be the 525 kit... 525 chain on 520 sprockets.. 
__________________
Harley Davidson.. The easyest way to turn gasoline into noise with out the side efect of horse power... |
|
#
8
28-08-12, 13:27
|
|||
|
|||
|
All in all, apologetic, correct sprockets dispatched, said to keep the incorrect sprockets - not worth the postage. Spares it is then.
So maybe a supplier of 525 XT sprockets in the UK would be benificial.
__________________
PCV REPLACEMENT ECU WITH 04 WIRING LOOM STAGE1&2DNA GEL SEAT INSERT LOWERED 20mm FRONT+REAR CLUTCH ARM MOD FORKSPRING SPACERS TALLER SCREEN THROTTLE GRIP CAM MOD DISTANZIAS 46TOOTH REAR SPRKT SPEEDO HEALER 30MM HANDLEBAR RISERS TOPBOX MOUNT 08 XTX SORTED, ALMOST. ...SHEEPSKIN - Because a pain at the rear is not just a moany pillion. |
| Sponsored Links |
|
#
9
28-08-12, 14:22
|
|||
|
|||
|
Quote:
on there own... I usealy go though 2 or 3 front sprockets to 1 rear..front dose 3 times the work and a tighter radius so it wares quicker... Front sprocket will take the chain & rear sprocket with it , if yer let it get to worn... Maybe better to stay with the 520 set up the more I think about it.. untill someone sells 14T & 45T sprockets on there own.... ( thats where a lot of chain ware comes from... People exspect the front sprocket to do the same mileage as the rear...)
__________________
Harley Davidson.. The easyest way to turn gasoline into noise with out the side efect of horse power... Last edited by Petenz; 28-08-12 at 14:33. |
|
#
10
28-08-12, 18:57
|
|||
|
|||
|
Phone TALON engineering of YEOVIL SOMERSET they can make sprockets.
|
|
| Thread Tools | |
| Display Modes | |
|
|
|
|
Linear Mode
