hi, i would like to drop the suspension on the rear of my ten, what would the lowest i could drop it. i have seen 40mm drop links, can you get lower than that. thanks PAUL.

Have a look here i think they can make you some up aswell . http://www.projection-components.co....model-88-p.asp

I lowered my XTR 50mm...
made a set of links 20mm longer
in the hole spaceing.. went from
90mm standard to 110mm
Every 10mm longer = 25mm drop..
they are easy to make..
I used 30mm X 6mm stainless flat bar...
Drilled 16mm holes @ 110mm spaceing
tack weld both links togeather then drill the holes
both are the same then..

__________________
Harley Davidson..
The easyest way to turn gasoline into noise with out the side efect of horse power...

Make sure your side stand is short enough so that you can actually use it after the lowering.