Popped out for a ride this morning all good
Got on it to come to work, and the high beam indicator is on but I've got no headlight, the bulb looks ok the fuse is ok, and everything else Is working as it should,
Any ideas ??
Before it gets dark please

__________________
you win some, lose some, crash some
K+N filter, snorkel removed, homemade kev mod (with his blessing), co raised,
Pipeworx cans, r1 led back light, under tray removed, small indicators, handguards, cnc short levers,

Can you still turn main switch off and display light turns off? Try removing the lightbulb from headlight and check it, looking at it might look ok but the element wire could of broken...if it's blown replace bulb but becareful you don't touch the bulb glass
Alex

Sent from my X10i using Tapatalk

Low beam was on ok fine while out earlier, then on restart high beam indicator on and no low or high beam light only parking light

__________________
you win some, lose some, crash some
K+N filter, snorkel removed, homemade kev mod (with his blessing), co raised,
Pipeworx cans, r1 led back light, under tray removed, small indicators, handguards, cnc short levers,

Sorted, broken earth wire on back of headlight,

__________________
you win some, lose some, crash some
K+N filter, snorkel removed, homemade kev mod (with his blessing), co raised,
Pipeworx cans, r1 led back light, under tray removed, small indicators, handguards, cnc short levers,

Had this problem with mine and traced it to a loose wire in the block connector by the steering head just under the edge of the tank.

__________________
XT660z NO MORE.