![]() |
![]() |
![]() |
|
|
XT660Z Mods Share views on all the mods you have done and those you intend to do |
![]() |
|
Thread Tools | Display Modes |
#
1
|
|||
|
|||
clutch & mirror mount
Just managed to overtighten & brake! (dont ask) the clutch/mirror mount, the black bit were the clutch pivot bolt goes through, does anyone have one to sell? or know were i can get one.
(Mods) Sorry if this is in the wrong place. |
#
2
|
|||
|
|||
Have you actually broken a piece off the casting, or just stripped the thread?
If it's the latter, this is your friend - http://www.machinemart.co.uk/shop/pr...%20repair%20m6 (check it's actually M6, I know the ones clamping it to the bars are, because, erm... ) A new, Yamaha clutch perch is �30.74 here - http://www.yamahamotorcyclespares.co...3E665555&uid=0
__________________
I spent a lot of money on travel and racing motorcycles - the rest I just squandered. XT660Z - Commuter, Adventurer...Racer? www.dashmoto.net Other bikes >> MT-03 / CG125BR-J / ER-6F Departed >> ZXR400L3 / EC300 / DR-Z400E / DR800S / GPZ500S / GS400 ![]() ![]() ![]() |
Sponsored Links |
#
3
|
|||
|
|||
Hi Uberthumper, No its the casting part thats broken therefore a replacement is needed, i suppose i need to find one in a breakers yard etc.
Just about had a heartattack when i phoned Wemoto, "Yes its a genuine Yamaha part, is it the complete unit, front and back, no i just need the back bit, okay, yes that will be �29.00 including postage !!!! WTF, i can only hope that one will turn up toot sweet as im ready to hop on & go. Steve |
![]() |
Thread Tools | |
Display Modes | |
|
|