I've just got my 05 XTX back on the road after a scrape with a car last November.. (have paid most of it myself due to the claim still going on ) it's a long story .... anyway I have the Yamaha Bark Busters fitted but they were removed... not by me... another long story... ...

oh bloody hell... get on with it man...

I have since had the bar ends out and noted that there is a missing part (well both actually) these obviously sit inside the bar for the bar end bolt to screw into and bite onto the inside of the bars. For now they have been bodged just to keep me going ... not by me..... it's shameful (I think they may have been bodged a long time ago and maybe I've only just noticed, but it would have been the same nameless lot...WTF!!!) who did this and i don't want to name names.. as they have been very good to me.... but I'd like to get the missing parts ordered/identified or even a picture ... can anyone help here? do you have a couple laying around that I could have maybe? Obviously I'll get down to Yam this weekend but thought I'd ask you Gents first. Cheers..

the bar ends are standard yam so are the bars and bark busters. thanks.

__________________
__________________________________
We're part of the solution... don't make us part of the problem!

Hello? is there anybody out there?

__________________
__________________________________
We're part of the solution... don't make us part of the problem!

Worth getting these rather than pay silly prices?


http://www.ebay.co.uk/itm/YAMAHA-XT-...item3cc08a7579

__________________

thanks but, i spoke to him before posting this thread, these don't come with the bar inserts so same problem... its' the threaded end that receives the bar end bolt that's missing...

__________________
__________________________________
We're part of the solution... don't make us part of the problem!

Here are a few to look at.

http://www.ebay.com.au/sch/i.html?rt=nc&LH_PrefLoc=2&_nkw=motorcycle%20bar%20 ends&_fln=1&_trksid=p3286.c0.m283

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946