Installing Scorpio SR-i900R
I just purchased a scorpio alarm and it seems pretty easy to install, except for the Ignition disable accessory(RID-5) where I have to cut a wire to add this feature to the alarm. I have 5 options where I can connect this except I don't know where these wires are. Not to good with bike wiring and don't want to cut the wrong wire.
These are the Ignition / Engine Control Wire options:
Option #1: Positive lead wire on fuel pump
Option #2: Positive lead wire on fuel injection system
Option #3: Positive wire that goes to the ignition fuse in fuse box. This should be either a 10 or 15 amp fuse labeled IGN. (Carbureted Bikes Only)
Option #4: Ground wire from ignition module
Option #5: Positive wire from ignition module to ignition coil.
Which is the easiest option for me, this being the easiest cable to access and cut. I appreciate the help guys. Ah and if it isn't asking too much if someone could show me exactly where to find the right cable with a pic or something equivalent
Thanks,
Freakyfreak
|