How can you take up the play using rubber tubes.
Having changed my chain and sprockets today I noticed there is a bit of play with the rear sprocket and wheel.
After 12000miles I would assume it may be the Cush drives:smilies

Think there is an official kev mod description but heres a link.

http://www.xt660.com/showpost.php?p=113529&postcount=1

__________________
Work hard, rock hard, eat hard, sleep hard, grow big an wear glasses if you need em.

if you do a search there are a few threads about this
you basically cut lenghts of inner tube lay them over the rubbers and push the sprocket carrier back on so it wraps around the lobes
think its about �20 for the set from yamaha for that amount id just replace em

__________________
you win some, lose some, crash some
K+N filter, snorkel removed, homemade kev mod (with his blessing), co raised,
Pipeworx cans, r1 led back light, under tray removed, small indicators, handguards, cnc short levers,

Thanks for the advice

Yes, but before ye push all day to get the sprocket carrier to wedge itself in...liberaly spray the rubbers wi WD40....it`l squeeze in nicley...

__________________
1st post of 2007, 2008, 2009 & 2014 gold star award

its �36.50 for the lot, i replaced mine yesterday.

__________________
...On a steel horse i ride.

ye could have saved yersel 36.50.. an cut up an old tube...everyone does it,, an it makes it as new...

__________________
1st post of 2007, 2008, 2009 & 2014 gold star award

just ordered mine today too �36 forgot there was 4 bits to it, why do they ask how many you want as if you'd ony replace 2 ?

mine also has too much play to be taken up with tube bits,
i expect them to be rock hard and in lots of little bits from the play i've got, the chain is too tight too which isn't helping, bike has 10k on it and as far as i know they are original

__________________
you win some, lose some, crash some
K+N filter, snorkel removed, homemade kev mod (with his blessing), co raised,
Pipeworx cans, r1 led back light, under tray removed, small indicators, handguards, cnc short levers,

Why do assume this is a bad thing? Is there supposed to be a little "Give" in this area.

Done the Kev Mod on mine a week ago and its great . Wish i had done it sooner !