Had a play with some carbon fibre that I bought to do the fake wood in my new 10 plate Mondeo titanium X Sport did the stained Leos first then the airbox side then the heel plate what do you guys think

Attached Images

	leos 3small.JPG (86.7 KB, 155 views)
	leos 4small.JPG (78.2 KB, 162 views)

__________________
My 5th XT660R Mods so far, K+N, Kev Mod, Yamaha Hand guards, Engine bars, Yam Sump guard, Yam Rack, Heated Grips, MT21s, Raised rear XTX dogbones, Front Raised with spacers, Extended Side Stand, Yam Touring Screen, Carbon fibre heel guards, CNC Short Levers, Snorkle Removed, 100W headlight bulbs, Rear pannier rack as rear crash bar CCC oval Cans, Zumo 660 +++

Looks good mate.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Looks superb! I wouldnt mine some on my Tenere!

__________________
Previous bikes:TS50 - RD125LC - XT250 - ZXR750L3 - BMW 650 Funduro - BMW 1100GS - XT660Z Tenere

Wow, looks great. Would do my pipes too?
What about heat resistance on exhaust?
How can I know I bought the right stuff?

Guys thanks for the comments as far as I can see from what ive done so far the wrap should be ok on exhausts but time will tell I havnt used it yet but the leo,s dont get that hot only warm,

As far as it goes for fitting th stuff I only use 3M carbon wrap it can be bought off ebay in various lengths and widths
I use a hot air gun and a really sharp craft knife you simply cover what you want making sure you dont get any creases then heat up with the hot air gun it then becomes very very malable and you are able to bend it into shapes you wouldnt believe let it cool and trim job done iv attached a pic of the car dash I did just to show what can be done by a complete novice on his first attempt

Attached Images

P1000493.JPG (163.6 KB, 98 views)

__________________
My 5th XT660R Mods so far, K+N, Kev Mod, Yamaha Hand guards, Engine bars, Yam Sump guard, Yam Rack, Heated Grips, MT21s, Raised rear XTX dogbones, Front Raised with spacers, Extended Side Stand, Yam Touring Screen, Carbon fibre heel guards, CNC Short Levers, Snorkle Removed, 100W headlight bulbs, Rear pannier rack as rear crash bar CCC oval Cans, Zumo 660 +++

That looks superb both on the bike and car. I am tempted to have a play with it for my X.

__________________