Hi Guys,

I've purchased a new set of Renthal bars to replace the standard (now scratched) Afam ones.

I know that some have you have done this already.

Does anyone have any tips for removing the throttle and all the switchgear from the bars? I had a quick look today, and everything looks pretty well secured...

Any suggestions greatfully received!

Storm

__________________
Racing
(a. & n.) from Race (v.t./i.)
The alchemy that turns base metals into heat, noise, power and motion.

Get a hack saw an cut the old bars an inch fae the throttle then slip it off

__________________
1st post of 2007, 2008, 2009 & 2014 gold star award

All I know you have to drill a hole somewhere on the new one for a pin to go in so that the switchgear doesn't roll over when loose. check it on your old ones.

Or cut the pin off as Kev suggested in an earlier post, which will make the controls more adjustable/customisable. You just need to make sure they don't come loose or else you will have a hard time trying to find your indicators and hooter.
Z

__________________