|
|
|
|
|
|
|||||||
| General Help Section Members help each other here with tips and tricks about mods / maintenance and servicing based on their own experiences |
 |
|
|
Thread Tools | Display Modes |
|
#
1
 11-12-10, 15:05
|
|||
|
|||
|
oops heard a noise!!
i dont know about anyone else but i think it was time to replace some parts....everyday i was adjusting chain and after cutting 2 links out enough was enough and out come the credit card...new 15 tooth front sprocket, 520 HD 'O' ring chain, and new 47 tooth rear sprocket from KEV yet to fit...
i didnt know chains bend that far lol pommie |
|
#
2
11-12-10, 15:57
|
|||
|
|||
|
how many miles has the chain done??
__________________
my mods 2008 XTX/C.C.C. stubies/D.N.A.stage 3 Air filter/PC3+Custom Kev map/Kev's O2 eliminator mod/yam sump guard painted/yam hand gaurds+spoilers/S.W.Moteck engine bars/R&G swingarm protectors/R&G fork protectors/Puig screen/Worry Brother Tail tidy/L.E.D rear light/L.E.D indicators/Personal number plate/Oxford hot grips/Hyperpro front springs/15w fork oil/Hyperpro rear spring/Avon Distanzia tyres/42t rear sprocket/powder coated heal plates and rear foot rests/L.E.D front spot lights |
|
#
3
12-12-10, 07:57
|
||||
|
||||
|
Lucky the chain never broke, your bike will feel silky smooth after the new chain & sprockets go on.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 
|
|
#
4
12-12-10, 09:01
|
|||
|
|||
|
Good quality chain is a must
Say ... anyone play with changing sprockets on the XTX? On my bike now, I'm +2 up on the rear and the acceleration improvement is noticeable 
|
|
#
5
12-12-10, 12:49
|
|||
|
|||
|
new chain on and front sprocket.one thing i did notice is when selecting 1st gear the bike no longer jumps forward...just have to get rear dampers done.....kev hope to get your sprocket tommorow
pommie |
| Sponsored Links |
|
#
6
12-12-10, 12:54
|
|||
|
|||
|
Quote:
not to sure prob say 5000kms fitted about year ago...but it did get worse last 2 months pommie |
|
#
7
12-12-10, 12:59
|
|||
|
|||
|
Quote:
pommie |
|
| Thread Tools | |
| Display Modes | |
|
|
|
|
Linear Mode
