Hello everyone,
Last month I bought a Nology ignition cable from Germany,
Yesterday I installed on my bike.when I First start...sound like a 640 KTM
(hear blast sound).then I have a DNA Stg2 filter and sound change.
and all rpm ranges are going aggressive.
I dont know here a dynometer but it was change something good.
Kev my friend my idea you have to try this before coil
because you bike big bore and you need to big spark (recommanded iridium spark plug).sorry to my english I hope I could tell..

__________________
Ported Head / 0,25 mm Thin head gasket / +2 TB / Stg 2 Hotcam / K&N Filter /Brisk Colder Spark Plug / DNA Stg2 Filter / 35 mm fork Spacers / 15 W fork oil / Fork Lowered 20 mm/ Ais Blocked / re-route engine breather / 44T Rear Sprocked / Carbonium Rear break hose / Crd 40mm exhaust pipe / rear spring two click stiffer / Home made Fork & Swingarm Protectors./ Front fork stabilizer (OTR)

If you got the money the iridium spark plug will offer longer service intervals, there is no HP gain from the spark plugs.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Iridium sparg plugs, only for good burning and if its burning good better fuel performance am I thing wrong ??
I wanted to say when you turn the throttle, good and quick reponse at all rpm range no HP gain
Just I told what I feel when I ride
I hope I will tell good

__________________
Ported Head / 0,25 mm Thin head gasket / +2 TB / Stg 2 Hotcam / K&N Filter /Brisk Colder Spark Plug / DNA Stg2 Filter / 35 mm fork Spacers / 15 W fork oil / Fork Lowered 20 mm/ Ais Blocked / re-route engine breather / 44T Rear Sprocked / Carbonium Rear break hose / Crd 40mm exhaust pipe / rear spring two click stiffer / Home made Fork & Swingarm Protectors./ Front fork stabilizer (OTR)

Thanks for your feed back.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Zaburtante,
I am saw, You bought Nology ignition cable.
What parts number is it?
What is cost?

hi tatran, u got it here
http://www.off-the-road.de/XT-660/El...ion-Cable.html
it costs 59e + shipping to ur country

__________________
own a xtx 06, removed snorkel, dna stage 1&2 filters, kev mod, akrapovič slip on