Hi guys,

thought I'd also pop in here and say howzit, pics of my 2005 XTR which I've just got. Been messaging with Kev to try and resolve the slight surging issue without spending another 10 grand on all the hop up bits..



Bike's a late 2005 model, has 15 000 Km's on the clock.
Made my own orangle light protector
I've made my own higher screen mod onto the stock Yamaha raised screen
Fitted Hand Guards
Fitted Wider Offroad Pegs
Fitted taller bar raisers
bought replacement plastics to preserve originals, and sprayed them Matt Black with my own decal design

That's it.. pretty stock really.. Busy now trying to cobble a Kev air temp mod together to try help remove the surge. Almost got it all gone, but it's still there at low speed\revs, a little dissapointing, but otherwise, fun bike in comparison to my Vstrom.



Cheers for now.

regards

Al

Welcome Al thats a tidy bike ,nice one.Do you really need a screen that high ?
Anyway enjoy the site and the bike.

Looks a good one Al.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Hi Johnno,

I've got used to a high screen where I can ride with the helmet open and not get hit by the wind. When I got the bike, although it has the "High" screen on, I was still in the windstream, so, had to do a pooratech farkle to stop the wind. If I sit on the bike, I look over the top of the screen, so, to me it's not that high..

cheers

Al

Nice one Al, this is a great site, im sure you will enjoy....

__________________
formerly known as Warrenxt660r