|
#
1
|
|||
|
|||
Master Cylinder
After a new master cylinder for my X as i find the one on it a bit vague, i know the previous owner had issues with it so not sure if its a stock one or not.
Anyway looking at a Brembo Gen radial cylinder but what ratio do i need? 19/20 or 19/18 |
#
2
|
|||
|
|||
Hi mate. Hope you're enjoying the bike.
The mc is the original. I had it swapped with a brembo radial, but put it back to standard before selling. Have you tried to rebleed it? the brembo was good, but mine had an issue with seals, it lost slowly pressure when feathering the lever. you must get the smaller though, 16/18 I think it was. They use the same on single disk ducati monsters and is quite popular with the supermoto crowd. Although, if I had had the cash I would have replaced it with an isr lever instead. |
#
3
|
|||
|
|||
Hello mate, yep still enjoying the bike, Thanks for the info, dont have 10 mins to spare to contemplate doing anything at the moment, but have big plans for it late summer/Autumn, im saving up the pennies!
|
Sponsored Links |
Thread Tools | |
Display Modes | |
|
|