After some technical riding I noticed that my MX boot was rubbing against the filter while standing and causing the thin metal wires to be damaged. I can see this ruining the filter after a few hundred rough kilometers.

Here is my solution. Some Ally cut bent and shaped to fit, it is bent away from the filter so it should have zero effect on air flow (no more than my leg is having at the moment :-) )and is at its widest as wide as the seat, Works great and doesn't look to bad I think. Might need to have this done as part of the Kit from DNA to avoid costly replacements.







Also note the sexy new footpegs





Jules

Well done Jules. Another inovative idea from SA guys...
look slike a mean set of tyres you have there...what is that?
GB

These footpegs are really sexy !!

Where I can buy these ?

Regards
ToKi

Nice mod mate, now in the XTZ mod section.

http://www.xt660.com/showthread.php?t=9309

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Dunlops!

D606 rear and a D908 Front, Amazing tires for off road, A Little noisy on tar but not to bad.

They are made by a company called Airtime
I bought them locally from accessories shop, They don't make a set that fits the Tenere so I got what looked the closest and modified them to fit, The model FP-2511 for the CR450F 02-08 only needs some grinding and shaping to fit on the Tenere, You will also need a new set of springs as the stock one is to thick,

Thanks

Jules

Hi, what engine guarde is that? Do you have anymore pictures of it on the bike?
Crusty

Images dont work anymore....

Still dont work...

The links are dead.

__________________
>-------<

Never underestimate the power of stupid people in large groups.