Hello all,

I asked my local Yamaha dealer this week to source me a Supersprox rear 45 tooth for my Ten and was told that they are not made for the Tenere yet. ******** to that. Searching the net as best I can from here I can't seem to find a part number. Has anyone fitted a 45 tooth Supersprox to their bike and if so, do you have a part number that I can pass onto my dealer and get one ordered in.

Cheers

Adam

__________________
Pro Taper Bars, Bark Busters, VSM Grip Warmers, TT Power Outlet, MSC Steering Dampener, MK3 Pivots, TT Crash Bars, TT Bash Plate, B&B Rad Guard, TT Headlight Protector, Polisport Fender, TK Single Can, OEM Centre Stand, OEM Panniers, D606 Front and Back, TT Led Indicators, Excel 21" & 18", Teknik Suspension, ASV Levers and other stuff i cant remember.

I have only one eye. Do you want me to look at the road or at the speedometer. Moshe Dayan

Yes I have one, http://calsport.co.uk/YAMAHA/3890-20...rockets/113942
but I can't see the model number on the site, however it has the number 885 etched onto it, or if you can wait until I get home later I can check the packaging for the full code?

XTX, XTR & XTZ all take the same rear sprocket.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Thanks lads.

Tripletom if you still have the packaging, it would be much appreciated if I could get it off you.

Kev, Have you ordered one in the past for your XT and if so, do you have a part number.

Thanks again

AM

__________________
Pro Taper Bars, Bark Busters, VSM Grip Warmers, TT Power Outlet, MSC Steering Dampener, MK3 Pivots, TT Crash Bars, TT Bash Plate, B&B Rad Guard, TT Headlight Protector, Polisport Fender, TK Single Can, OEM Centre Stand, OEM Panniers, D606 Front and Back, TT Led Indicators, Excel 21" & 18", Teknik Suspension, ASV Levers and other stuff i cant remember.

I have only one eye. Do you want me to look at the road or at the speedometer. Moshe Dayan

Only use JT sprockets.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Sorry, it's 855.6xx3 is what's on the packet, as well as stating it's a 520 chain, and 45T sprocket.