Greetings!

Three of the eight LEDs on my OTR tail light have packed it in

Two questions:

1. Are LEDs easy to change?

2. Do these types of aftermarket light units use the same template, i.e will the holes in the back be the same?

Shot in the dark I know, but if I can't change the LEDs I would prefer to order a unit from anywhere but OTR, and be able to fit it directly to my existing home-made tail tidy.

Rock on

__________________

hey,
im not sure about the refitting and everything of new LED'S i presume you could just remove them and resolder some new ones in as long as you get them in the right way round!

As for getting a new light, I have a DRC Edge 2 on my R it cost me about �35 inc postage if i remember and its brilliant! ill post a pic tomorrow when i get one as im just finnishing of my rear Mods!

Chris

__________________
live Free, Ride Free!
No maps no plans, just get on your bike and go!



XT660z......What a machine!!

Current mods:- Yamaha top box, Yamaha hanguards, Heated grips, High front fender, Aux lighting front/rear.

Thats the Light that i use on my tail tidies that i seel, the DRC Edge 2 tail light.

also use it on my off roaders / green laners for years, and never had a problem

Look at the for sale section under WB's tail tidies and the red LED is the DRC one

WB

and WB rear lights cost a fraction of the OTR's you know it makes sense!

Just had a look at them WB, the LED version looks identical to the OTR one, which is a good thing. Would need to know the distance between the two bolts on the rear of the unit to make sure it fits my current tail tidy.

How much would it be for just the rear light mate?

Thanks & Regards
Denny

__________________

Denny,

The distance between the 2 bolts is 80-81mm approx centre to centre on the bolts.

�25, brand new in box incl postage, to you dude

Cheers

WB

You're a good man Worry Brother

Let me check my measurements first thing tmrw & I'll get back to you

Thanks
Denny

__________________

Drop me a PM if you're interested matey as i out quite a bit this w/e

Cheers

WB

I have had the DRC Edge 2 tail light on my bike for 17 months & have had no problems. They are well made & last.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Hi WB,

Checked the measurements & it looks like it will fit without too much hassle. Will need to drill two new holes for the bolts.

I'll send you the money on Monday morning from the office via paypal. Please send me your Paypal address.

Thanks again bud

Denny

__________________