Here's a mini review of some Aux Light Brackets that Darren (Gas_Up_Lets_Go) asked me to take a look at.

The brackets are a strong and simple design, I'll take a simple design any day over a complex creation. They fix to the lower mounting point for the headlight assembly and extend forward following the line of the headlight assembly. Then out to each side to provide a horizontal mounting point to suspend your lights from at a point of your choice. You just need to drill a hole in each side at the point you want to fix your lights.

The brackets are very secure and fit easily and neatly, there's no wiring to move etc, just remove the lower fixing bolt, offer up the brackets and fit the longer bolt thats supplied with the brackets.

I fitted a set of PIAA 60mm lights (Thanks, Jenny!) to the brackets, these fit nealty into the recess between the headlight assembly and the indicator cowels.

In summary, the brackets are very solid and hold the lights so that they don't vibrate (any more that the rest of the bike that is!!). They position the lights in just the right place and provide a level platform to work from.

Here's a few photo's:











There's a post from Darren about the brackets here:

http://www.xt660.com/showpost.php?p=100133&postcount=20


Nick.

Yes I can recommend these brackets also. I have fitted a pair and they fit PERFECTLY with the lights I have fitted to them just in the right place.

They are also very well made and sent out very well packed.

__________________
:tenere:

Mods, Oxford heated grips, Givi Rack and top box, Stage 2 DNA filter and top, 02 sensor eliminator, Metal Mule taller screen, Seat hump trimmed off, .KEVS FUEL MOD (THE 1ST ONE FOR THE TENERE) , Extra fuse box, 12volt plug in socket, Zumo550 sat nav, , Barkbusters


What Bill Clinton REALLY said to Monica Lewinsky was: "Sack my cook"

Sadly Bike now sold 11/6/11

Another happy customer here. Recommended

I'm going to be adding a weather resistant switch and mounting bracket to the line-up. same as the one in this picture:



It clamps to the headlight frame, so no drilling or 'adjusting' required to the bike. You don't even notice it's there when you look at the bike. There is no price available just now, but if you are intersted then drop me a line.

Soft Luggage Exhaust Protectors are also in development, will be tested and ready for the springtime.

__________________
>-------<

Never underestimate the power of stupid people in large groups.

Anyone know who stocks these PIAA lights as I elt the last set go on my GS...madness. They cost me �50 (from USA)all in inc loom relay etc but I cant find a dealer as PIAA dont make them anymore.

Hi guys,
what bulbs are in the PIAA lamps, and how long have you been running them? As i have flattened the battery after two days of running the Micro De fogs!!!!!
Mark