Hi Folks, I am new to this forum. I recently bought an 05 XTX which is great.

I also bought a genuine Yamaha sump guard/belly pan off ebay but it didnt come with the brackets. I asked the previous owner but he has sold the bike. I have contacted Yamaha and asked them and they can only tell me that I cannot buy the brackets seperate and would have to buy the whole lot

Would anyone have any idea how these brackets are made up ?

and to

There is one of our forum members that actually made his own belly pan, but I can't remember who it was, if anyone does please help, he might be able to give you a few ideas.

Good luck and enjoy the forum

pssst (newbie section )

welcome to the forum mate.

I think you would have to make up your own brackets. If someone could post some pic where it is bolted to the bike, that will help to see what needs to be done.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Welcome to the forum.

Im with Kev on this one. Shouldnt cost/take too long as from what i know of the yammy bash plate its very much like all the others.

Ive a SWmotech bashplate and its used 2 connections to the bike. First on is under the engine just infront of the rear suspension(in front of what i guess is some sort of centre stand mount). This mount is just a U shaped steel with too tabs out the top with some nuts welded to it.

The other is between the exhausts at the front of the bike behind the front wheel. It connects onto the oil deliverly tube and again has a U shaped piece of steel this time the 2 prongs of the U get bolted onto the delivery tube.

(I would get you some photos but im away to england tomorrow on the bike so dont have time,sorry, should be able to get some next weekend if you can wait that long)

Edit( just noticed you come from Northern Ireland, where abouts do you live??)

__________________
Plough on

Hope these pics help.


This is the front mount.


This is the rear mount.
All the bolts go through rubber bobbins so the guard dose not vibrate front bolts are allen heads and the ones underneath are M6\ 10 mm spanner

Thanks folks for your help and suggestions. Bear has kindly sent me pics of his bike and sump guard brackets, so I will be able to make something up to hold it on,

PS. I will have to get some pics and introduce meself

Thanks again
Keith

For anyone wanting to buy a sump guard "TOURATECH"

Expensive yes, but well made and in stock, got it the next day after ordering. Just need to know German to fit it!!!

does anybody know where theses pictures have gone?

__________________
live Free, Ride Free!
No maps no plans, just get on your bike and go!



XT660z......What a machine!!

Current mods:- Yamaha top box, Yamaha hanguards, Heated grips, High front fender, Aux lighting front/rear.

Hi all,
I have the same issue as keefie in the original post to this thread... could someone post some photos of the brackets?
Thank you,
Selina