Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660 Tech Section > General Help Section
FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

General Help Section Members help each other here with tips and tricks about mods / maintenance and servicing based on their own experiences

Reply
 
Thread Tools Display Modes
  # 1  
Old 28-05-09, 13:55
aggy00 aggy00 is offline
Newbie XT-Moto
 
Join Date: May 2009
Location: lincolnshire
Posts: 4
aggy00 is on a distinguished road
Bad Vibrations

Hi All. Is It Just Me Or Do The Xt660x Vibrate Big Time. Getting Numb Fingers Vibes Through Pegs, Brand New 2008 Xt660x With 350 Miles On Clock. Please Assist Or Will Have To Sell Bike As Can Not Get On With Vibrations....

Cheers Mark................
  # 2  
Old 28-05-09, 14:06
Worry Brother Worry Brother is offline
Expert XT-Moto
 
Join Date: Oct 2007
Location: In the Twilight Zone
Posts: 182
Worry Brother is on a distinguished road
aggy00,

1. Tyre pressures - 28-29 front. 30-32 rear dependent upon your weight
2. What tyres do you have fitted - plus get the wheels re-balanced at the dealership
3. I had a 'duff' tyre from new and had a similar situation but managed to get it swapped
4. Get delaership to double check that all nuts & bolts have been tightened to the correct pressures as part of the pdi

Not sure if the above helps, i'm sure other members will chip in and fill in the missing bits to check up on...

WB
  # 3  
Old 28-05-09, 16:38
johnno johnno is offline
XT-Moto SuperStar
 
Join Date: Mar 2007
Location: loughborough
Posts: 278
johnno is on a distinguished road
Thumbs up

Hi and welcome its new and not run in yet but i cant remember mine being bad enough to want to sell but it took a while to get used to after jap4.
  # 4  
Old 28-05-09, 17:19
Bear Bear is offline
XT-Moto SuperStar
 
Join Date: Nov 2007
Location: Peterborough
Posts: 285
Bear is on a distinguished road
Are you a new rider? are you hanging on to the bars a bit too hard? I found that in the begining I was suffering from bad fingers but after I settled in the the bike a bit it stoped, I do get it in my feet a bit if i,ve been on the bike all day. I hope you can get over it they are great bikes.
__________________

  # 5  
Old 28-05-09, 18:12
johnno johnno is offline
XT-Moto SuperStar
 
Join Date: Mar 2007
Location: loughborough
Posts: 278
johnno is on a distinguished road
Thumbs up

Quote:
Originally Posted by Bear View Post
Are you a new rider? are you hanging on to the bars a bit too hard? I found that in the begining I was suffering from bad fingers but after I settled in the the bike a bit it stoped, I do get it in my feet a bit if i,ve been on the bike all day. I hope you can get over it they are great bikes.
nice one kev
Sponsored Links
  # 6  
Old 28-05-09, 23:43
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,063
Kev is on a distinguished road
I fitted my standard pipes back on last weekend 07 XTX, my bike now vibrates quite a bit now over the 60MPH mark or 4000rpm. Having the Carbon cans on does reduce the vibration on my bike heaps. I will try rubber mounting the rear can brackets to see if it help & come back to you.

Being a new bike I would run some spanners over the bike tightening every bolt & nut that you can see, especially the engine & bar mounts.
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

  # 7  
Old 29-05-09, 00:00
aggy00 aggy00 is offline
Newbie XT-Moto
 
Join Date: May 2009
Location: lincolnshire
Posts: 4
aggy00 is on a distinguished road
thanks guys will look into all these things
  # 8  
Old 29-05-09, 00:09
aggy00 aggy00 is offline
Newbie XT-Moto
 
Join Date: May 2009
Location: lincolnshire
Posts: 4
aggy00 is on a distinguished road
cheers what style of renthal bars do you have? ie what dimensions, because most shops have told me they wont fit!

thanks mark
  # 9  
Old 29-05-09, 00:12
aggy00 aggy00 is offline
Newbie XT-Moto
 
Join Date: May 2009
Location: lincolnshire
Posts: 4
aggy00 is on a distinguished road
vibes

thanks all. taking bike back to dealer to look at. if they say its ok. not sure can live it. so may be selling it loosing money!

cheers mark
  # 10  
Old 29-05-09, 02:13
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,063
Kev is on a distinguished road
Quote:
Originally Posted by aggy00 View Post
cheers what style of renthal bars do you have? ie what dimensions, because most shops have told me they wont fit!

thanks mark
I run Protaper fats. I used the protaper clamps with modified bolts.

http://www.mxdeals.com/handlebar-tap...taper-pro.html

http://cgi.ebay.com/ebaymotors/ProTa...Q5fAccessories
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 23:58.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top