Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660Z T�n�r� > XT660Z T�n�r� Tech Section > XT660Z Mods
FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

XT660Z Mods Share views on all the mods you have done and those you intend to do

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  # 1  
Old 01-02-10, 16:32
zOU zOU is offline
XT-Moto SuperStar
 
Join Date: Jan 2009
Location: Drom, France
Posts: 269
zOU is on a distinguished road
Thumbs up TUTORO chain oiler

in my quest towards maximum laziness, I've ordered a Tutoro chain oiler last friday.

http://www.tutorochainoiler.com/

Not only it'll save my in chain maintenance but it's easy to install (why be lazy once when you can be twice)


I had a Loobman on my GSE500, which was good although a bit messy depending on weather condition/temperature

The Tutoro is also cheap (24pounds with dual feed nozzle)




I'll fit it to the Tenere and if I'm happy enough I'll buy another one for the VFR....

the flow is adjustable by turning the knob

http://www.tutorochainoiler.com/aboututoro.html


The picture above is the one with the single feed delivery

that's the dual feed:


Oh and they sell separately a nice clip to hold it instead of the cable ties provided...


I think it should have been part of the base kit , although I didn't use the one I bought

I kbnow it's "only" 5h worth of lubing...

but if you're going to ride all day:

- either you're going to be home at the end of the day and you can top it up
- you're on a bike trip and you will carry a can of chain lube (as you have to lube your chain every 500km), so you can carry a (very) small bottle of oil instead

also, depending on the material used for the cap of the reservoir, there may be a possibility of having a remote oil tank, linked to this reservoir by a tube (and drilling a hole in the reservoir cap), or a (quite) large rubber hose would provide an adequate extension too

at the end of the day, it's only 20ish euros, the price of 2 can of chain lube...

I've fitted the kit today (yep delivery was fast: posted friday, delivered monday in ireland)

The "tank" is tiny, the inside diameter would barely take my little finger.
It's about the size of a lighter.

it can hold 8ml of oil.

As you can see in the 1st post anyway, it's slightly smaller than a 10ml syringe.

Fitting is pretty straightforward, the longest part is "priming" the system aka: opening the valve fully and waiting for the delivery tube to be filled which can be long depending on oil viscosity and temperature....

At first I intended to use the 2 stroke oil I had, but then i remembered I had some scottoiler oil

it takes 5 turns to open the valve fully, so there's a good margin for proper tuning/setup.

Pictures of my setup (on a dirty bike), clic for bigger view:

Full setup: tank on top, twin feeder inside the swingarm



Close up on the feeder:



the tank and the delivery tube:

3 cable ties on the chain cover, plus 2 cable tie holders on the swingarm to keep the cable tie in place as the swingarm narrows towards the end.


Close up on the tank and it's 2 rubber blocks (provided), the delivery tube goes inside the rear peg mount point.



Questions ?
__________________
former Red owner !
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:04.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top