hello all, has anyone fitted after market heated grips yet? as i plan on buying some to fit with the yamaha guards.can anybody foresee any problems before i jump in with two feet or hands as the case may be. many thanks oldbaldy

Ive not got a tenere but i cant see there being any problems. Heated grips are simple to fit really and shouldnt take too much power/watts from your bike.

What type are you going for??

Ive oxfords with the old style push button with a knob controller. They work great and the grips give off masses of heat. My dads got the new ones which have the flat push button only controller and it seems to not like being on with out the bikes revvs going. Something to do with an automatic switch off system so it doesnt drain the battery!!! Grips still work fine when the bikes going just you cant get any heat in slow/stop,start traffic as they keep switching off.

Get them on you know you want too.

__________________
Plough on

Got the same problem. Would switch off by itself when the engine is at idling revs. My first one was the turn knob switch which packed up, then bought a new controller for 20quid- the push button thingy and now that seems to be faulty aswell. Think it might be water inside the controller.

ill be going for the oxfords, but im concerned about is will there be enough room for cables etc. if i fit the yamaha hand guards and deflectors? thank again oldbaldy

Ahhh, cold. I was cold in one June morning shortly after I picked up the bike, which then led me to install the heated grips in the first 1000km checkup.

The Yamaha dealer recommended Daytona, another after-market guy said don't spend less than EUR50, otherwise it would be crap. Oxford grips did not have the 22mm size when I looked, and CLS was too expensive and too sophisticated with its sensor. Another Japanese brand, Saito, was available at sub EUR 50 and offering multiple notches at the control, but I didn't feel it was reliable purely because it's being cheaper and offering more than others.

After having searched around and talked to a few people, I decided on the Daytona heated grips, EUR 60, with just "Start" and "On" options. "Start" draws over 40w and it heats up in a few minutes, and "On" gets down to twenties or even high teens watts. I have tested them in summer in Germany as well as in my 3-week trip in Scandinavia.

While in Germany, "On" is almost useless as it generates too little warmth even during some cool August dusks/mornings. "Start" can be burning hot to the point I have to switch on and off to cool off. I was using Held gloves made in Kangaroo skin.

While in Scandinavia, I pretty much exclusively and all the time used "Start" and I was at times still cold when I was in Sweden at 6 degree celsius. In other parts when it was in low teens I was comfortable with the BMW Atlantis water-proof and climate-control gloves. At that temperature, I was using heated vest, and this goes back to another discussion on how much juice it drains from the battery. With both my vest and the heated grips on at full blast, I think one of them did not work at its full effect. I am not sure if it matters which one I turn on first, despite the fact that I always warmed up the bike by driving it for over 20 minutes before I turned on anything. I think the bike's battery can handle it, but I was just being safe.

Even the dealer installed the grips for me, the wiring got lose - somehow the heat on the wires melted the plastic connector the dealer put in - then I was so proud of myself that I fixed it and it lasted for my entire trip and it is still working Also, the heat melted the glue that held the grip firm on the bar, so my left side grip was lose after numerous times of twitching them when playing with the clutch. Luckily, I got another dealer fixed it up for me before the tirp. So beware of the connections and the glue on the bar.

I was actually disappointed in what after-markets have to offer in terms of heated grips. I would like to have more notches to select, at a decent price, but they just aren't available in Germany.

They are my two cents, hope they help.

I have a set of oxford grips fitted by my dealer to my Tenere. I have just been on a 500 mile trip around the lakes in absolutely shockingly wet weather.

They have been brilliant with no problems what so ever. Switch mounted on a plate which fixes to the handlebars where the bolts fasten the bars to the bike.

I also have some sports Oxford muffs which look Sh%t but are fantastic. Whilst my mates were ringing out there gloves I was still sporting warm and dry hands.

Was on a trip in 2 degree Celsius yesterday, God I wished my heated grips wasn't still lying in a plastic bag on my desk at work.

I'm planning to use symtec heated grips on my Tenere

http://www.windingroads.co.uk/catalo...roducts_id=138

They allow you to use any handlebar grips you want, and come with a flush rocker switch which you can mount in the cockpit.

I'm just deciding what handlebars to buy before adding heated grips..

I had these on my KTM950, and loved them.

Did you not find it difficult to get the Original grips back on over the Heating elements. The last Grips I changed required the strength of Geoff Capes to get them over the bar and throttle slide. With the extra diameter I could see it being difficult.

__________________
Colin
09 XTZ in Blue and its nearly Stanard.
My Mods - Peatbog rear rack

Some of these on ebay at the moment

http://cgi.ebay.co.uk/SYMTEC-HEATED-...d=p3286.c0.m14