|
|
|
|
|
|
|
|
#
1
 16-09-08, 21:35
|
|||
|
|||
|
XT660 to 700ccm conversion
Hello guys,
Shortly I'm doing a 660 to 700cc conversion. Here's so far what I've done. 1. bought a used XT660 head + cylinder + cam (oem) 2. bored and coated (nicasil+?) the cylinder to 700 ccm; done by http://www.powerseal.nl; they use a special process. See pics IMG_0869.jpg IMG_0870.jpg IMG_0874.jpg IMG_0875.jpg 3. bought a suitable 103mm JE piston (thanks Kev for the advice!); See pics IMG_0876.jpg IMG_0877.jpg IMG_0878.jpg IMG_0880.jpg IMG_0881.jpg 4. tuned the cylinderhead + paint job (done by http://www.off-the-road.de; see pics before (head already sand blasted) - (IMG_0940.jpg IMG_0944.jpg IMG_0945.jpg IMG_0946.jpg IMG_0947.jpg IMG_0948.jpg IMG_0949.jpg) and after head tune job and coating job (IMG_1198.jpg IMG_1199.jpg IMG_1201.jpg IMG_1202.jpg IMG_1203.jpg). Next steps: - coating the cylinder to black - still waiting for the OTR cam; will arrive shortly. - remove the engine Will keep you informed! Greetings from Holland, Marcel (marjani) Last edited by marjani; 03-01-09 at 12:51. |
|
#
2
16-09-08, 21:51
|
||||
|
||||
|
another Fran-kenstein motor, well done, I feel like an organ donor
Hello Ladieeeeeeesssss  There's more organs where that came from!!
|
|
#
3
16-09-08, 22:06
|
|||
|
|||
|
oeps, forgot to mention CaptMoto for the used head+cylinder+cam.
Thank  you Fran!
__________________
bike is sold:
103mm Big Bore|Nicasil cylinder (PowerSeal)|JE piston|CR 11,3:1|ported head (OTR)|Modified cam (OTR)|Powder coated head+cylinder (black)|PCIII|+2 TB l Modded 2-in-1 exhausts (Trinity+Akrapovic)|DNA stage 1 & 2 Filters|Tail Mod|XTX Wheels|XTX chain cover|XTX rear shock connecting arms|Metal footpegs|Acerbis handguards|Hyperpro springs|15W fork oil|Snorkel removed|AIS blocked|NGK CR9EK|SpeedoHealer|Reroute engine breather hose|HRC brake reservoir l Magura Hymec hydraulic clutch
|
|
#
4
16-09-08, 22:23
|
|||
|
|||
|
what Hp will u get after that?
|
|
#
5
16-09-08, 22:33
|
||||
|
||||
|
Well done that man, glad it's finally coming to the install.
I have my fingers crossed for you, +60HP for sure.  Can't wait to see the dyno results, as we have a few other 700 conversions going on behind the scenes so there will be a few compassions to compare.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 
|
|
#
6
18-09-08, 22:09
|
||||
|
||||
|
Marjani , how much are the costs so far?
Want to do the same... |
|
#
7
27-09-08, 00:28
|
|||
|
|||
|
Yesterday I recieved the OTR cam. Nothing more to tell about this part, looks just the same as the oem cam.
I also started the Engine Removal; removed the exhaust pipes, drained the oil and coolant, side panels. Wanted to remove the fuel tank, but have to drain it first. Guess there still about 7 liters of fuel in there, so have to be carefull not to spill it around the garage (my wife will kill me, haha!). Lucky I don't smoke
Today I took the cylinder for a powder coating job. It's now 'paint it black'
I'm very frustrating at the moment, because the weather forecast will be good the whole weekend and I can't drive my damn blue steel horse! But I have still got my good ole' Vespa and a baby Honda dominator to drive....no wheelies for me for the moment
Guess I need some mental coaching here, because this is a hell of a job! Wish Kev was my neighbour... Skorzeny: I will give you a full review of the prices asap. Greetings from a sunny Holland, Marcel
__________________
bike is sold:
103mm Big Bore|Nicasil cylinder (PowerSeal)|JE piston|CR 11,3:1|ported head (OTR)|Modified cam (OTR)|Powder coated head+cylinder (black)|PCIII|+2 TB l Modded 2-in-1 exhausts (Trinity+Akrapovic)|DNA stage 1 & 2 Filters|Tail Mod|XTX Wheels|XTX chain cover|XTX rear shock connecting arms|Metal footpegs|Acerbis handguards|Hyperpro springs|15W fork oil|Snorkel removed|AIS blocked|NGK CR9EK|SpeedoHealer|Reroute engine breather hose|HRC brake reservoir l Magura Hymec hydraulic clutch
Last edited by marjani; 18-01-09 at 14:29. |
|
#
8
27-09-08, 07:35
|
||||
|
||||
|
Looking forward to the results.
If you get stuck you know where to find me, I am always willing to help. 
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946
|
|
#
9
28-09-08, 13:15
|
||||
|
||||
|
Ok,thanks...
|
|
#
10
28-09-08, 20:49
|
|||
|
|||
|
Quote:
will let you know if I get stuck! cheers. marcel
__________________
bike is sold:
103mm Big Bore|Nicasil cylinder (PowerSeal)|JE piston|CR 11,3:1|ported head (OTR)|Modified cam (OTR)|Powder coated head+cylinder (black)|PCIII|+2 TB l Modded 2-in-1 exhausts (Trinity+Akrapovic)|DNA stage 1 & 2 Filters|Tail Mod|XTX Wheels|XTX chain cover|XTX rear shock connecting arms|Metal footpegs|Acerbis handguards|Hyperpro springs|15W fork oil|Snorkel removed|AIS blocked|NGK CR9EK|SpeedoHealer|Reroute engine breather hose|HRC brake reservoir l Magura Hymec hydraulic clutch
|
 |
| Thread Tools | |
| Display Modes | |
|
|
|
|
Hybrid Mode
