|
|
XT660Z Mods Share views on all the mods you have done and those you intend to do |
|
Thread Tools | Display Modes |
|
#
1
|
|||
|
|||
hel performance brakeline kit xtz tenere 08
hi all,
as hel performance is on my doorstep i took the tenere out to hel to which they measured her up and new brake line's made up. so on my way i went to fit my new brake lines. they will do any colour line and any colour ends for you ,the prices he gave me are . full kitt - 2x front and 1x rear brakeline kit �87=00 front kitt- 2x front brakeline kit �58-00 rear kitt- 1x rear brakeline kit �21.00 so check out the web site www.helperformance.com or give them a ring on 01392 811601 sorry about the pics im not to good with computers i will get it right one day Last edited by sherkxtz; 09-10-08 at 19:55. |
#
2
|
||||
|
||||
Sorry to butt in - would you check those prices - it appears the full kit is dearer than the separate front and rear kits?
__________________
My Mods | TLC | A good spannering | Kev's brilliant Mods & advice via XTSupporters - Best �10 ever spent.Lucid Puppy && SeaMonkey - Wubi - - Boinc - electric sheep "Strive to be the person your dog thinks you are" |
#
3
|
||||
|
||||
Are they worth it ?
Are the new lines worth buying ?
I can easily do stoppies on my Tenere with the stock system and when off road it is probably overbraked. I even had to tone down the setting on the front brake lever. Just asking ?
__________________
We are now retired....so....... lots of this and this and no more of this or this |
#
4
|
|||
|
|||
Braided lines on a 6/10ths bike - hmm. New bikes? - hmm.
Older bikes - yes. 9/10th race bikes - yes HEL are VERY good lines, quality-wise but the banjos etc aren't always rotated exactly where you need them (same for quite a few hose kits). They aren't the cheapest either. Also, the picture of the rear line - there seems to be a lot of slack. Yes, you don't want it taught but you don't want it catching on anything either. For that money they should fit like the OEMs. |
#
5
|
|||
|
|||
hi, the line is only slightly longer but then being braided i guess it got to be to allow for the swinging arm travel.i had no problem with the ends not being in the right place as the pipe is quite flexable and easy enought to put into place without hassell.once the pipe was in place it pretty solid and dosent slapp around at speed.
|
Thread Tools | |
Display Modes | |
|
|