|
|
|
|
|
|
|
|
#
1
 17-04-08, 22:51
|
||||
|
||||
|
LeoVince Cans + DNA 1&2 + PCIII
If anyone has this combination of mods I would highly recommend PCIII map
M412-518 - without any fiddling it has given the bike the smoothest part throttle riding I've ever had - not even a hint of surging.
The bike does smell quite rich when stood behind it while revving her up, but I guess it must be OK as the bike runs so well. However, the best bit is the fantastic amount of thrust the bike has gained from 3000rpm to 5500rpm-ish. I'm not sure if its lost a little bottom end or because the midrange is so strong it just feels that way, or maybe that's just the effect the pipes have. All I have to do now is the AIS as the popping on deceleration turns heads, so only a matter of time before it turns the wrong heads. Anyway for completeness the combination is: XT660X 2004 DNA 1&2 LeoVince X3 cans with long Db killers in (Very deep sound - great) CO1 @ 12 ECU marked 00  Last edited by Kev; 18-04-08 at 01:02. |
|
#
2
18-04-08, 00:59
|
||||
|
||||
|
Quote:
May be we can start a thread what fuel map are you running. Can other forum members post their results here for all to see.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 
|
|
#
3
18-04-08, 10:23
|
||||
|
||||
|
I�ve the same combination. The betters maps that i put it has gone the "Kev fuel map" and the Captain map. I prefeer first.
Other that i put it was 515, it�s good too but i think that it has fuel exceeds. Now i�ve put kev fuel map with a little modification to low revs. I�ll prove the 518 to see the result.
__________________
|
|
#
4
19-04-08, 00:09
|
||||
|
||||
|
Quote:
Quote:
What changes did you make to the map to get it working nicely?? Let us know how you do with 518 Paul |
|
#
5
05-05-08, 07:18
|
|||
|
|||
|
I have the M 412-520 map installed but hasnt tryed out any ther maps so cant compare. Is it safe to fool around with these maps that everybody talks about? Just to load the PCIII and try the bike and if im not happy just change to another map?
Ive tried to join the supporter club here but doesnt work for me and the paying. Damn
__________________
Be Smart-Drive safe-Stay legal |
|
#
6
05-05-08, 10:47
|
||||
|
||||
|
Quote:
|
|
#
7
05-05-08, 11:18
|
||||
|
||||
|
As Tony said no problems in swapping maps with in reason, make sure they have simular set ups & you will be ok.
In the supporters section we have over 35 different fuel maps for all years & most set ups.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946
|
 |
| Thread Tools | |
| Display Modes | |
|
|
|
|
Hybrid Mode
