Hello, I recently changed the cover on the front master cylinder for a nice shiny new one which I bought from Off The Road. I removed the old cover, checked the diaphragm for damage and ensured it sat in the cylinder correctly before screwing it back down. I came back an hour later and noticed a layer of fluid all the way around the lip of the cap and some around the screw heads. I removed the cap multiple times and re-seated it but it still kept gathering around the bottom. I replaced the diaphragm with a new one but the fluid still comes out. Anyone had experience with this before? It�s driving me nuts

if you put the old cover back on does it stop leaking?..Id contact OTR or send it back as faulty..I used stainless screws to 'dress' mine up.

After a few days it stopped leaking, I�m not 100% sure why but it�s good now. Hopefully won�t have to take it off any time soon.