On the Z it is used for front body with indicators to the headligt but are used on a high number of other bikes.

I was quoted 13� plus postage for _ONE_ . Might be reasonably if it was for 4 of them but it is just at rubber collar around a nut.

I've some other lying around but they are to small.

Anybody seen a cheap replacement that will fit ?

__________________
2011 Yamaha XT660Z ABS T�n�r�.

• Puig +8cm dark screen, Garmin Zumo 220, Scottoiler eSystem v2
• Barkbusters Storm with external weights, Noname 30mm bar risers & EzMoto alu. levers
• Kev's O2 Controller, Mccoi stepless controller with Hein Gericke heated grips
• TT +4cm seat, Pivot Pegs, Altech stainless sprocket cover

Which part exactly are you looking for? Photo?

__________________
Bike: 2013 XT660Z, TKC70 tyres

Mods:
Barkbusters, Scottoiler, DIY Tail Mod, DNA Stage 3, Power Commander V & O2 Eliminator, Exan X-Black Stainless exhaust, Tool tube, Ohlins linear front fork springs, Nitron rear shock, JT front and Supersprox rear sprockets, D.I.D. VX 520 chain, Adventure Spec bashplate, DIY USB Outlet, DIY chain guide, Kev's Throttle mod

http://www.facebook.com/onemooseonemotorbike

I've just gotten these from Louis (where i usually buy oil/filters etc)

https://www.louis.de/artikel/gummimu...umber=10003129

I've not gotten around to fitting it yet

8€ for 6 instead of 13€ for 1 is a lot more reasonable

__________________
2011 Yamaha XT660Z ABS T�n�r�.

• Puig +8cm dark screen, Garmin Zumo 220, Scottoiler eSystem v2
• Barkbusters Storm with external weights, Noname 30mm bar risers & EzMoto alu. levers
• Kev's O2 Controller, Mccoi stepless controller with Hein Gericke heated grips
• TT +4cm seat, Pivot Pegs, Altech stainless sprocket cover

I bought a set with 8 pieces of these with allu bolts for 6-7euros, they are calling/selling them for fairing bolts


https://www.ebay.ie/sch/i.html?_odkw...bolts&_sacat=0

__________________



Vasilis/Bill
xt660z 10ere

Fairing bolts are typical only 5mm - On the tenere ones needs 6mm to fasten the grey/black sides to the front.

__________________
2011 Yamaha XT660Z ABS T�n�r�.

• Puig +8cm dark screen, Garmin Zumo 220, Scottoiler eSystem v2
• Barkbusters Storm with external weights, Noname 30mm bar risers & EzMoto alu. levers
• Kev's O2 Controller, Mccoi stepless controller with Hein Gericke heated grips
• TT +4cm seat, Pivot Pegs, Altech stainless sprocket cover