Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660Z T�n�r� > XT660Z T�n�r� Tech Section > XT660Z Mods
FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

XT660Z Mods Share views on all the mods you have done and those you intend to do

Reply
 
Thread Tools Display Modes
  # 1  
Old 17-05-18, 20:10
TenereEcosse TenereEcosse is offline
Newbie XT-Moto
 
Join Date: May 2015
Location: Tarbert, Argyll, Scotland
Posts: 10
TenereEcosse is on a distinguished road
USB Charging

Hi

I recently purchased a switched inline charger to charge my phone when using it as a sat nav - one that is directly attached to battery with in line fuse for upcoming trip and it works fine.

One like this: https://www.kuma.co.uk/products/idevice-power-supply

However i thought about adding another phone to the trip and wanted to see if it charges off it too. The charger only has one USB socket so my question is, is this even possible? ie charging two phones off one USB socket thats running 2 amps? And if so, how ? How do you guys do it when you are running satnavs, phones, heated grips etc all at once?

Andy

Last edited by TenereEcosse; 17-05-18 at 20:20.
  # 2  
Old 17-05-18, 21:06
Chalk Two's Avatar
Chalk Two Chalk Two is offline
XT-Moto SuperStar

 
Join Date: Dec 2017
Location: in the dog house but in the sun
Posts: 608
Chalk Two is on a distinguished road
It's a kinda personal thong...did I just say thong?....thing... but for two usb outputs you could put this into this in to one of the inner panels.

https://www.ebay.co.uk/itm/12V-24V-T...EAAOSw4PxaHRMQ

Cheap as chips and works.

As for sat navs...... well there are a few threads on how to take a direct (ignition-on-only) supply from behind the panel that sits under the rev counter. It's a spare Yamaha plug that is linked to the 1st fuse (from memory ) in the fuse block under the seat. People have cut off this original Yamaha connection of the free end snap connector and hard wired their sat nav supply to it. Ignition on equals fused supply to the sat nav.

As for heated grips, that is another choice thing with a lot of riders going for a relay circuit option whereby the ignition-on provides a source of 12v to trip a relay that then in turn feeds the heated grips. This removes the worry of forgetting to turn off the grips when you park up after a ride......as in....ignition off is grips off. Also searchable on here.

The 660 generator has a poor supply for extras and will be quickly used up if you run heated grips / heated jacket / riding spot lights and other toys. The generator uses approx 115 watts just to keep the ECU and the bike running leaving something like another 100 watts to mess with. Take more than that and you'll be riding in power defecit and causing a flat battery and all sorts of other issues.

The above numbers are from memory and may be a bit fudged by red wine at the time of writing....(yes, I know...it's early).

All the info is fully searchable in this forum...Enjoy !
__________________
I have a lot of growing up to do. I realized that the other day inside my fort.
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 01:34.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top