hi guys ive done copious amounts of searching on here and googling the issue to try and find out whats going on so if i have missed the tread or anyone knows where to go then let me know

i have an 2008 xtx, starts, runs and rides great...no issues there but the engine management light is on and when i go into the diag on the dash it simply comes up with no codes. and i cant work out how to turn the light off to see if it comes on again and stores a code.

it has got a power command unit on it im wondering if thats the cause or im just clutching at straws?...

anyone on here had a similiar issue on there bike?

cheers in advance. jethro

Only thing I can think off would be to disconnect the battery for 15 minutes to reset everything.

Ok mate ill give that a go. Will let you know what occurs

Have you got an owners handbook?..unless you know how to reset the clock that is

I do have the handbook, ill look it up, thanks again

Ok so i disconnected the battery and left it over night. Connected it up the next day, started the bike. Engine light still on so that didnt cure it...

I thought i would go back into the diag mode now thinking the guys in the garage had missed something or didn't know what they were doing...

Sure enough came up on a couple of codes. d61 12, d62 r and d63 24.

I didnt know what the codes meant and after looking on the sticky thread on here about the codes i still didnt feel anymore knowledgeable on them so i went back to them selected each one and flicked the stop switch on then on off on each code. d62 4 and d63 24 made the fuel pump go and then they both read 0 after that. d61 12 just cleared to 0 and hey presto no light.

So all in all poor diagnosis in the first place. Thanks for your help tho nik. Cheers