Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660Z T�n�r� > XT660Z T�n�r� Tech Section
FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

XT660Z T�n�r� Tech Section Tyres, Mods, Luggage & Long distance preparation

Reply
 
Thread Tools Display Modes
  # 1  
Old 04-04-18, 16:34
Chalk Two's Avatar
Chalk Two Chalk Two is offline
XT-Moto SuperStar

 
Join Date: Dec 2017
Location: in the dog house but in the sun
Posts: 608
Chalk Two is on a distinguished road
Clutch switch - won't start in gear - 1 solution

.

Thought I'd share this if, like me, you have the signs of a broken clutch switch.

The symptoms were; whilst out on the trails I switched off, parked up in 1st gear to stop it rolling downhill then got back on, switched on, pulled the clutch in and nothing. It only started when it was put in neutral.

Got back home and removed the clutch switch (under the clutch lever pivot) and bench tested it and it was perfect. Using my trusty probe, the loom became suspiciously guilty.

After removing the 4 thousand bolts to get the tank off (Z) it would have been a case of just looking for damage and pierce-probing along the faulty wire until I got a signal but the damage was obvious. There was a distinct pinch/crush mark on the plastic sheath near the headstock. Cutting it open revealed a split cable that distinctly looked pinched .

All soldered up and sorted.



__________________
I have a lot of growing up to do. I realized that the other day inside my fort.

Last edited by Chalk Two; 04-04-18 at 18:35.
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 01:20.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top