hi all,

i'm looking to fit a universal end can to my XTZ (akra looks from aliexpress, 47cm or 57cm).
i want to know how long is the longest end can you have mounted?
just the length of the can (the thick part), not the connecting tube to the header.
i like the 2 silencer setup but they're too heavy and harder to fabricate a splitting tube from 1-2 so it's going to be a 1 can setup and a toolbox on the other side then.
i want it as long as possible ,to get a deep sound and not annoyingly loud.
my previous bike, a honda fmx 650, had 2 end cans from Arrow and they sounded AWSOME, loud bangs when heavy on the throttle, and very distiguished when just rolling, perfect.
the Dominator and MTC can are too loud from what i heard on sound clips.

thanks guys

I run an mtc link pipe with a 16" can,fitted with a universal baffle,but I'm just finishing off an akrapovic can which i needed a sleeve. That can is 14" as I had to shorten it to avoid contact with the panniers rear upper mounting bar.
opt_20180120_171058.jpg
http://imageshack.us/photo/my-images/924/8zgsTz.jpg

Are you planning on using your original exhausts link pipe.

__________________
2011 xt660z.
Yoshimura cans ,kev mod,Dna 2, Stahlkoffer panniers,Hepco Becker box,Givi crash bars,Mita e07 tyres.

Hope this picture works

Attached Images

2018-01-20 17.23.58.jpg (193.0 KB, 13 views)

__________________
2011 xt660z.
Yoshimura cans ,kev mod,Dna 2, Stahlkoffer panniers,Hepco Becker box,Givi crash bars,Mita e07 tyres.

i don't want to cut up my original pipe, so i'll have to fabricate a link pipe. but if i go for the 57cm long one, there's no more then about 8cm of link pipe needed to make...

how does it sound with the 16 inch or 14 inch pipe without db killer? not too loud?

The 16" can is very loud without the reducer. I haven't fitted the shorter akrapovic can yet.

__________________
2011 xt660z.
Yoshimura cans ,kev mod,Dna 2, Stahlkoffer panniers,Hepco Becker box,Givi crash bars,Mita e07 tyres.

what's the inside diameter of that 16" can?

51mm.
The picture of the akrapovic can shows a 51-60mm reducer as it was previously on an Sp1. I have the other matching akrapovic can here unshorted which a reducer I'm probably going to sell as I don't think I'll run a twin can setup.

__________________
2011 xt660z.
Yoshimura cans ,kev mod,Dna 2, Stahlkoffer panniers,Hepco Becker box,Givi crash bars,Mita e07 tyres.